基于arm的dtu遥信与遥控单元的设计与实现-电子与通信工程专业论文.docxVIP

万方数据 万方数据 Subject : Design and Implementation of DTU Teleindication and Telecommand Unit Based on ARM Specialty : Electronic and Communication Engineering Name : Qin Jing (Signature) Instructor : Liao Xiaoqun (Signature) Niu Kai (Signature) ABSTRACT As people have more and more high demand of the power quality, the supply reliability of power distribution network attracts more and more attention. DTU is the important component of distribution network, its teleindication unit and telecommand unit complete real-time monitoring function of running equipment in the power distribution system. The reliability of teleindication and telecommand directly influences the power quality. However, during power grid operation period, teleindication often appears false alarm and telecommand often appears maloperation. These will bring us the direct economic losses and even may lead to huge power accidents. In order to solve the above problems, this paper puts forward the design of DTU teleindication and telecommand unit based on ARM. First of all, this paper studies DTU teleindication and telecommand technology, confirming specific design aim and functional requirement. After completing the whole design of teleindication and telecommand unit and the partition of soft-hardware, the specific soft-hardware design and implementation are elaborated. The hardware design adopts multiple boards’ solution, including CPU board, teleindication and telecommand board, LCD board. Teleindication and telecommand board is hot-plugging and configures flexibly. It can meet the different requirements of power distribution occasions. CPU board uses i.MX287 processor based on ARM9 core. LCD board and teleindication and telecommand board use ARMv7 architectures 32-bit STM32F103VE processor. Multi processor has the characteristics of fast response speed, high accuracy and good stability. The teleindication and telecommand’s circuit uses two stage isolated optocoupler to improve counter-jamming perf