刚柔组合桩型复合地基设计方法研究-岩土工程专业论文.docxVIP

Study Study on Design Method of Rigidflexible Composite Foundation Gong Yu-zhi Geoteehnical Engineering Tutor：Wang Shi-jie Abstract Combined composite foundation is a kind of newer method of ground treatment．It breaks the traditional way of thinking that using single material or single type to treat ground，but using various materials or various patterns to treat ground．Each component carries out its excellent function to achieve and optimize composite foundation’s function． However，its theories development gets behind with the engineering fulfillment．This dissertation analyzes and research on design method ofthe composite foundation． Firstly，the summary of the current combined composite foundation’s research is made at the beginning． Secondly,some fundamental conceptions were introduced．Action mechanism and failure mode of composite foundation were summarized．Based on summary of stress ratio of pile to soil，composite modulus，calculations method of composite foundation，their advantages and disadvantages were analyzed and valued．Some reasonable suggestions were advanced． Thirdly，bearing capacity of deep mixing pile composite foundation is forecast by support vector regression(SVR)and the result is satisfaction．It was found that normalized data was better than original data during using support vector regression(SVR)algorithm． Fourthly，design method of rigid pile composite foundation was put forwarded according to settlement contr01．This method was validated by applying to practice． Fifthly，in the design ofcushion，according to the settlement ofpiles is equal to the soil between piles in the range of treated ground，the relation of cushion’s modulus of deformation and thickness is attained so that the bearing capacity ofpiles and soil can be utilized farthest． Sixthly，considering the settlement of buildings’middle was larger than other parts， rigid pile was applied to middle and flexible pile was applied to other parts． Key words：combined pile；composite foundation；cus