基于线结构光的微v型槽三维尺寸的测量-机械工程专业论文.docxVIP

优秀毕业论文 精品参考文献资料 广东工业大学硕士学位论文性和精确性。所得结果与 广东工业大学硕士学位论文 性和精确性。所得结果与zygo白光干涉仪测量结果比较接近，其中宽度的平均误差为 1．03％，角度的平均误差为0．77％，补偿后高度的平均误差可降低到0．11％，证明了本 文的测量方法的有效性。本文的测量方法效率高、成本低下，可用于微V型槽精密的 在线测量。 关键词：线结构光；微V型槽；三维尺寸 万方数据 AbstractAbstract Abstract Abstract The connection loss is one of the important factors influencing the quality of transmission in optical fiber transmission．The connection loss caused by the poor connection of fibers end faces．When using V-groove the connecting component，the connection quality is mainly restrained by the 3D dimension of V-groove．Therefore，it is very important to improve the quality of optical fibers connection by measuring the dimension of the V-groove．Currently,there are still many difficulties and challenges for micro V-groove measuring technologies．The first is the material problem of the micro V-groove，the characteristics of its transparent and reflection limit the measurement accuracy．Also，the measurement accuracy requirements increase，to achieve submicron nanometer precision has become a new challenge．On the other hand，online measurement，the economy of measurement and other problems have become an urgent need to solve the problems Line structured light measurement technique，compared with the mechanical stylus type measurement technology and other contact measurement technology，is characterized by simple principle，easy realization，higher precision and be applied to on-line detection，In this paper,we use the line structured light measurement technology to measure the three-dimensional size of the V-groove According to the principle of line structured light measurement，the measuring device is designed．Which includes the fixture and adjusting device for microscope and laser，they used for clamping and adjusting the relative position between microscope and laser．Stepping motor is used to drive the sample to achieve the purpose of one dimensional scanning．By used C++language，OpenCV library and OpenGL library，the software system is desi