矿井通风设计毕业论文..doc

PAGE \* MERGEFORMAT II PAGE \* MERGEFORMAT II 贺西煤矿矿井通风系统设计 摘 要 此次设计矿井为汾西矿业集团贺西煤矿150万吨/年的矿井设计，扩建后可达300万吨/年，该矿井有9层煤矿，开采中有4层，剩余5层因地形、距离黄河西段无法开采。该矿井的井田储量为20700Mt，服务年限为112a。该矿井的采掘方法为双立井同时工作的推进方式，主要有4个开采区。采煤方法为全部煤壁垮落采煤法，顶板支护处理办法为全部垮落法，采煤工艺为机械化放顶煤法。 该矿井的通风方法为抽出式，采煤工作面采用U形状的上山通风方法，掘进工作面主要采用压入式通风，采区通风系统为轨道上山、运输上山进风，矿井所需风量，困难时期所需风量为164m3/s，容易时期所需风量为149m3/s，电动机型号为YB355M2-8的异步电动机。 关键词：通风设计；矿井通风系统；通风阻力。 Design of Mine Ventilation System in Hexi Coal Mine Abstract The design of the mine for the Fenxi Mining Group Hexi coal mine 1.5 million tons / year of mine design, expansion of up to 3 million tons / year, the mine has 9 layers of coal, mining 4 layers, the remaining 5 layers due to terrain, From the western part of the Yellow River can not be mined. The mines reserves are 20700Mt and the service life is 112a. The excavation method of the mine is the way of the double-shaft working at the same time, there are four mining areas. Coal mining method for all coal wall collapse mining method, the roof support treatment approach for all the collapse of the law, mining technology for the mechanized caving method. The ventilation method of the mine is drawn out, and the U-shaped uphill ventilation method is adopted in the working face of the coal mining. The working face of the mining face is mainly made by pressing ventilation, and the ventilation system of the mining area is up the mountain, The required air flow rate of 164m3 / s, easy times for the required air flow of 149m3/s, the motor model YB355M2-8 asynchronous motor. Key words ：ventilation design； mine ventilation system ；ventilation resistance. PAGE \* MERGEFORMAT IV PAGE \* MERGEFORMAT IV 目录 TOC \o 1-3 \h \u HYPERLINK \l _Toc19107 第1章 井田概况及具体条件 PAGEREF _Toc19107 1 HYPERLINK \l _Toc29370 1.1 井田概况 PAGEREF _Toc29370 1 HYPERLINK \l _Toc6115 1.1.1 井田位置及范围 PAGEREF _Toc6115 1 HYPERLINK \l _Toc22157 1.1.2地形地势 PAGEREF _Toc22157 1 HYPERLINK \l _Toc15572 1.1.3交通位置 PAGEREF _Toc15572 1 HYPERLINK \l