基于单片机的红外遥控电子密码锁设计毕设说明方案.docx

盐城工学院本科生毕业设计说明书(2013) 基于单片机的红外遥控密码锁设计 PAGE \* MERGEFORMAT 1 毕业设计说明书 基于单片机的红外遥控电子密码锁设计 专业 电气工程及其自动化 学生姓名 班级 学号 指导教师 完成日期 基于单片机的红外遥控电子密码锁设计 摘要：目前大部分的锁都是机械式的，其最大的缺点是利用简单工具就能很容易地把锁打开，不安全。针对这种情况，设计了基于单片机AT89C52和红外线接收管的红外遥控密码锁，设计包含红外发射模块、红外接收模块和单片机处理模块。与一般的采用专用遥控编码和解码集成电路的设备不同，它具有安全可靠、成本低廉、连接方便，简单易用，应用范围广等特点，而且特别适合家庭，宾馆，仓库，私家车库等场所。 红外遥控电子密码锁，主要分为遥控部分和主机部分。当从遥控器输入密码时，键盘向单片机发送外部中断，单片机识别按键号码并且将其编码后通过红外发光二极管发送到主机接收部分。主机接收部分的红外接收器接收到红外信号，将其整理放大之后通过串行口向单片机发送串行口中断，单片机得到串行中断信号将其解码还原成发射前的信号，之后验证密码，判断开锁还是报警。主机接收部分通过键盘的外部中断得到密码信号，无需红外遥控发射，可直接验证密码。同时主机部分还有修改密码的功能，倘若密码泄露可以及时更改密码。红外遥控电子密码锁其稳定的特点，安全的性能，便捷的操作方式和广泛的应用范围等使其具有良好的市场前景和发展空间。 关键词：单片机；红外发射；红外接收；串行中断信号；密码修改 Design of the Infrared Remote Control Electronic Locks Based on MCU Abstract: At present, most of the locks are mechanically, its biggest drawback is the use of simple tools can easily open the lock, not very safe. In view of this situation, I designed the infrared remote control locks based on microcontroller AT89C52 and the infrared receiver tube. The design includes an infrared transmitter module, infrared receiver module and microcontroller processing module. Different with the dedicated remote encoding and decoding integrated circuit device, it has a safe, reliable, low cost, easy to connect, easy to use, and a wide range of applications, and is particularly suitable for families, hotels, warehouses, private garages and other places. The infrared remote control electronic locks, is divided into a remote part and a host part. When you enter the password from the remote control, the keyboard is sent external interrupt to the MCU, microcontroller identification key number and encoded by the infrared light-emitting diodes sent to the host receiving part. The infrared receiver in the host receives receive the infrared signal, finishing zoom sent serial port interrupt to the microcontroller through the serial port, the microcontroller serial interrupt signal to decode the signal into pre-launch, after verification