镍基合金高温塑性变形行为的研究-材料学专业论文.docxVIP

优秀毕业论文 精品参考文献资料 研究生优秀毕业论文 温条件下，能耗峰值与再结晶形核与生长过程相关。此外，在低温、高应变速率条件下， 温条件下，能耗峰值与再结晶形核与生长过程相关。此外，在低温、高应变速率条件下， 合金出现失稳区。 根据加工图分析得到028镍基合金的最优热加工条件，即变形的开始条件为12000C、 lOs～，结束条件为1100、O．1 S～。这样既能满足实际需求，又能降低能耗，提高生产效率。 关键词：028镍基合金：热变形：本构方程；加工图；能耗值；动态再结晶 万方数据 Hot Hot deformation characteristics for Nickel-based superalloy Discipline：Material Science Student Signatu re： 渤q№ Supervisor Signature： ≯哆[i从 Abstract The hot-working technology of the corrosion resistant Ni-based alloy N08028 which is applied in high acid gas oilfield is investigated．Since the thermoplastic at high temperature is weak and the thermal deformation zone of the 028 alloy is narrow，the hot extrusion is the only technology for the processing of the studied alloy．In the current work，the hot deformation behaviors at l 000。C-1 2000C are investigated by determining the process parameters of hot extrusion in combination With the help of analysis testing methods，e．g．optical microscopy(OM)， scanning election microscopy(TEM)and transmisson electronic、 microscopy(TEM)．The main conclusions are as follows： The strain．stress curve of the 028 alloy deformed at 1000。C-12000C indicates a typical dynamic recrystallization phenonmenon．With the elevating strain rate and decreasing deformation temperature，peak stress and steady stress increased while the recEcstallized grain size decreased．A high deformation temperature and low strain rate will accelerate the dynamic recrystallization． By hot extrusion experiment，the deformation activation energy of the 028 alloy is determined，as 420．9kJ／m01．The correspondingly constitutive equations and expressions of model for dynamic recrystallization are given by， 删6¨2h{(淼 _l：曼 +[(斋刘1 ＼、●●●／ 420886 舍=，．2·669×·。15[stn O．005912916cr)]3 56exp(一 R丁 万方数据 一十纠怦]¨3 一十纠怦]¨3 Fhe maxtmum energy dissipation is related to the nucleation and growth of dynamic recrystallization．When the strain mte is high，the nucleation of dynamic recrystallizatioll dominates the maximum energy dissipation．When th