复杂长程抽芯花洒塑料模具设计.doc

复杂长程抽芯花洒塑料模具设计 摘要 本塑料模具设计选用的塑件为花洒。花洒是流线形结构,使用二维绘图难以描述，本课题采用Pro/E软件对塑件进行了三维造型。针对花洒的结构特点，分析该塑件的成型工艺，并确定了注塑模的设计方案。在模具设计中巧妙地利用液压侧抽芯机构，以及活动型芯加滑槽机构，以达到防止型芯掉落损坏塑件和方便型芯复位的目地。并根据注塑模具结构设计详细论述了花洒塑件注射模具的设计过程，完成了花洒塑料模具相关图纸的绘制，以及整个花洒注塑模具的结构设计。通过对这套花洒模具进行的相关模流分析，说明了这套花洒模具设计方案是可行的。 关键词: 注塑模具；液压抽芯；花洒 Complex long-range core-pulling plastic mold design ABSTRACT The design of plastic parts for the selection of showers. So it is difficult to describe by two-dimensional drawing. The product and mold of the top cover of Sprinkler were 3D designed by Pro/E software.According the structure charatristics of the Sprinkler analyzde the proless of the gear side cam block in mold structe ,stated the injection mold structure design and working process. In the mold design ingenious use of hydraulic pressure side core-pulling mechanism, and activity cores and slider institutions, in order to prevent the product from the core falling down and convenient to put the core back.. Descriping the process of the design of the flower sprinkles plastic injection mould in detail according to the design of injection mould structure, and complete the related drawings, as well as the whole stucture design. Based on the Mold class analysis to the flower sprinkles injection mold prove that this design proposal is feasible. Key Words: Injection mold；hydraulic core_pulling；Sprinkler 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc262711277 1 绪论 PAGEREF _Toc262711277 \h 1 HYPERLINK \l _Toc262711278 1.1 塑料工业的重要地位 PAGEREF _Toc262711278 \h 1 HYPERLINK \l _Toc262711279 1.2 国外注塑模发展情况 PAGEREF _Toc262711279 \h 1 HYPERLINK \l _Toc262711280 1.3 国内注塑模发展情况 PAGEREF _Toc262711280 \h 2 HYPERLINK \l _Toc262711281 1.4 国内外发展差距 PAGEREF _Toc262711281 \h 3 HYPERLINK \l _Toc262711282 1.5 发展趋势 PAGEREF _Toc262711282 \h 4 HYPERLINK \l _Toc262711283 2 塑件造型设计及工艺分析 PAGEREF _Toc262711283 \h 5 HYPERLINK \l _Toc262711284 2.1 功能设计 PAGEREF _Toc262711284 \h 5 HYPERLINK \l _Toc262711285 2.2 塑件结构设计和proe三维造型 PAGEREF _Toc262711285 \h 5 H