《旋转气锚的理论研究与设计论文》-毕业论文设计（可用）.docVIP

哈尔滨石油学院本科生毕业设计（论文） PAGE XXVIII 哈尔滨石油学院本科生毕业设计（论文） 摘 要 本论文通过对资料进行研究，分析了气锚油气分离器分气机理和分气效率的影响因素；介绍简单气锚和旋转气锚的计算方法；设计出了新型旋转气锚。该型旋转气锚利用螺旋片对油气混合物产生的离心力进行分离，一般采用闭式结构，所有流体均需经过旋转气锚，适合在产量高，油气比较低的井中使用。本文对所设计的气锚进行了理论计算和强度校核，该气锚具有结构简单，分离效率高的优点。深入开展井下油气分离器分气效率的研究和井下油气分离器设计，对提高抽油系统的管理水平、提高抽油井泵效、改进油气分离器的结构设计等方面具有重要意义。 关键词：井下油气分离器；气锚；工作机理；分气效率 Abstract The thesis analyzed of the gas anchor oil-gas separator mechanism and the separation efficiency of the gas; It introduced simple gas anchor and rotary gas anchor method of calculation and designed a new type of rotating gas anchor; This type of rotary screw gas anchor unit of the oil and gas mixtures were separated by centrifugal force, generally used the closed structure, after all the required rotary fluid gas anchor; This rotary gas anchor suitabled for the high yield and relatively low oil and gas wells.In this paper, a theoretical calculation of the design of gas anchor and strength check was done. The gas anchor was simple in structure and had high separation efficiency. So an in-depth study of oil-gas separation efficiency of downhole oil-gas separators had important meaning for improving control level of oil pumping system, increasing pumping efficiency of production wells and improving structure design of oil-gas separator. Key words: downhole oil-gas separator; gas anchor; operate principle; gas separator efficiency PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT I 目 录 TOC \o 1-2 \h \z \u HYPERLINK \l _Toc7536 第1章 前 言 PAGEREF _Toc7536 1 HYPERLINK \l _Toc31860 1.1 问题的提出和研究意义 PAGEREF _Toc31860 1 HYPERLINK \l _Toc18461 第2章 气锚油气分离机理研究 PAGEREF _Toc18461 2 HYPERLINK \l _Toc8758 2.1 分气原理 PAGEREF _Toc8758 2 HYPERLINK \l _Toc14112 2.2 常用气锚综合对比 PAGEREF _Toc14112 5 HYPERLINK \l _Toc16243 2.3 螺旋式井下油气分离器结构及工作原理 PAGEREF _Toc16243 10 HYPERLINK \l _Toc32564 2.4 螺旋式油气分离器的优缺点及适用范围 PAGEREF _Toc32564 12 HYPERLINK \l _Toc27642 第3章 气锚的设计计算方法 PAGEREF _Toc27642 14 HYPERLINK \l _Toc16125 3.1 简单气锚设计计算 PAGEREF _Toc16125 14 HYPERLIN