《液压弯轨机整机设计论文》-毕业论文设计（可用）.docVIP

PAGE 本科毕业论文 液压弯轨机整机设计 THE DESIGN OF HYDRAULIC BENDING MACHINE 学院（部）： 机械工程学院 专业班级： 机设09-10班 学生姓名： xxx 指导教师： xxx 2013年 6 月 10日 PAGE I 液压弯轨机设计 摘要 液压弯轨机具有结构紧凑、重量轻、密封性能好、使用方便、安全可靠， 可以在很大程度上降低工人的劳动强度，提高工作效率，改善轨道施工、维护质量。在设计中，缸体和端盖的连接方式采用整体车削成型。截止阀和调压阀都考虑了缸体的整体尺寸，为了达到精简尺寸的目的，都采用了比较简单的结构。设计大小缸的活塞杆和活塞密封时，都采用了Y型密封圈，而在选择缸体底部的密封时采用了O型密封圈。液压缸的活塞杆与活塞的结构设计同平常的设计一样，在端盖上加了导向环,在活塞上都加了支承环，但活塞杆与活塞的连接采用的是过盈连接。在设计小缸时，采用了与螺栓相同的结构，通过螺栓的螺纹实现小缸与缸体的连接。 关键字：调压阀，截止阀，泄露，动密封 THE DESIGN OF HYDRAULIC BENDING MACHINE ABSTRACT Hydraulic bending machine has compact structure, light weight, good sealing performance, easy to use, safe and reliable, can greatly reduce labor intensity and improve work efficiency, improve rail construction, maintenance quality. The graduation design of the cylinder and end caps connection uses the whole turning molding. In designing the butterfly valves and regulator, I consider the overall size of the cylinder, in order to achieve the purpose of streamlining the size, both adopt a relatively simple structure. In designing the piston and cylinder sealing, both adopt the Y-ring, but in the bottom of the cylinder seal, I choice the O-ring. The piston rod and piston of the hydraulic cylinder have the usual structure, Increase the guide ring in the cover and the support ring in the piston, but Interference Fit is used to connect the piston rod and piston. In designing the small cylinder, I choice the same structure as the bolt, connecting the small cylinder and the cylinder with the bolt Whorl. KEYWORDS: valve, globe valve, leakage, dynamic seal PAGE i 目录 TOC \o 1-3 \h \u HYPERLINK \l _Toc358106961 摘要（中文） PAGEREF _Toc358106961 \h I HYPERLINK \l _Toc358106962 摘要（英文） PAGEREF _Toc358106962 \h II HYPERLINK \l _Toc358106963 1液压系统介绍 PAGEREF _Toc358106963 \h 1 HYPERLINK \l _Toc358106964 1.1液压传动的概念和原理 PAGEREF _Toc358106964 \h 1 HYPERLINK \l _Toc358106965 1.1.1液压传动的概念 PAGEREF _Toc358106965 \h 1 HYPERLINK \l _Toc358106966 1.1.2液压弯轨机