锂离子电池英文.docVIP

锂离子电池技术英文词句 2.3 assembly line process(5/15)流水线工艺 film loading-vacuum on-film folding-sliding jig backward-top cutting-sliding jig forward- vacuum off-film unloading 放上包装膜—抽真空—包装膜折叠-分切夹心的后端-剪掉顶部-分切夹心的前段-释放真空-拿下包装膜 station 岗位 two station 两个岗位 folding 折叠 guide type 指导方式 top cutting 顶部剪切 knife 刀片 2.3 assembly line process(6/15)流水线工艺 j/r loading-vacuum on-j/r jig backward-bottom former up-upper former down- 放极组-抽真空-极组夹具放在后端-模板末端在上面-顶端在下面- heating forming-former up,down-j/r jig forward-vacuum off-j/r unloading 加热模板-模板上下翻转-极组夹具朝前-释放真空-取下极组 station two station 岗位 两个岗位 heating forming pressing time,preset timer 加热模板 施压时间 施压次数 temperature thermocouple 温度热电耦 time:mmin,2~max.3sec 时间： press force :40~50kg 压力 temperature:150 温度 2.3 assembly line process(7/15)流水线工艺 film loading-fim clamp-sliding jig backward-edge pushing-tab clamp-tab unclamp- 放上包装膜-包装夹具-分切极组末端-整边-放极耳夹具-卸下极耳夹具 sliding jig forward-cell unloading 分切极耳前端 station two station heat sealing top 热封 sealing thickness control(micrometer) 热封厚度控制（毫米） sealing control pressing time,preset timer 热封控制 施压时间 施压次数 precision regulator 精度校准 temperature, thermocouple 温度热电耦 time :min.2~max.3sec时间 press force:250kg 压力 temperature:180~250 温度 2.3 assembly line process(9/15)流水线工艺 cell loading-vacuum on-sliding jig backward-side cutting-feeding-tab cutting- 放上电芯-抽真空-滑动夹心后端-裁边-流入下工序-剪极耳 sliding jig forward-cacuum off-cell unloaing 滑动夹心前端-释放真空-取下电芯 station two station side cutting knife side cutting force 100kg tab cutting knife tab cutting force 100kg 2.3 assembly line process(10/15)流水线工艺 cell loading-sliding jig backward-vacuum pad down-open-needle down-e/l filling(e/l-needle up-needle up-vacuum pad up-sliding jig forward-cell unloading station two station e/l supply 3kuter sub-tank on equipment metering pump hi -bar pump,hbd-2bc-17 accuracy; under 3.0;±0.1g ocer 3.0; ±3.