普通砖砌体墙抗震性能试验及非线性模拟分析-建筑与土木工程专业论文.pdf.docxVIP

太原理工大学硕士研究生学位论文云图和结构层间位移的分析，对比研究构造柱、开洞率和结构高度对砌体 太原理工大学硕士研究生学位论文 云图和结构层间位移的分析，对比研究构造柱、开洞率和结构高度对砌体 结构抗震性能的影响。 关键词：砌体结构，抗震墙，破坏形态，抗震性能，试验有限元分析 Ⅱ 万方数据 太原理工大学硕士研究生学位论文SEISMIC 太原理工大学硕士研究生学位论文 SEISMIC PERFORM A NCE TEST AND NONLINEAR SIMULATION ANALYSIS 0F COMMON BRICK MASONRY WALL ABSTRACT Masonry structure is an ancient form of building structure，it has a long history in our country．Previous damage shows that due to the brittle nature of the masonry,masonry structures badly damaged in the earthquake．Given the masonry structure is still a maj or form of structure in China quite a long time in the future，seismic research of masonry structures is very important．In this paper, a font masonry wall between window with structural columns and horizontal reinforcement is tested under horizontally low cyclic loading and its model is established with ABAQUS finite element software．Comparing their seismic performance，such as failure modes，carrying capacity and energy dissipation capacity．And on this basis，simulate Models to analyze the factors affecting the bearing capacity of masonry walls．The content of the research is based on Shanxi science and technology key proj ect 20 1 1 03 1 3 026—3 and NSFC Firstly,elaborate the development of masonry structures，the damage characteristics and Situation of masonry structures seismic research，the research contents and purpose of this paper are proposed．Brief the test specimen II—TB2’S design，production processes，equipment installation and test load system．Describe the crack development and the destruction process of specimens，and the specimen’S seismic performance，such as skeleton curves， hysteresis curves，displacement angle，ductility and energy dissipation capacity are comparatively Calculated and analyzed． Moreover,select ABAQUS finite element software to make the study of masonry materials and concrete materials，including their constitutive relations 11I 万方数据 太原理工大学硕士研究生学位论文and 太原理工大学硕士研究生学位论文 and plastic damage models．Estab