关于相变金属铜固体氧化物储能电池热能管理.pdf

Smart Grid 智能电网, 2016, 6(6), 360-375 Published Online December 2016 in Hans. /journal/sg /10.12677/sg.2016.66040 Heat Management Based on Phase-Change Metal Copper in Solid Oxide Cell System * Lizhen Gan , Mingzhou Liu Department of Industrial Engineering, School of Mechanical Engineering, Hefei University of Technology, Hefei Anhui th th th Received: Oct. 20 , 2016; accepted: Nov. 12 , 2016; published: Nov. 15 , 2016 Copyright © 2016 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Open Access Abstract In this paper, we investigate the heat storage and utilization based on copper metal tank to en- hance the electricity cycling efficiency in the solid oxide cell system with a configuration of Ni-YSZ/ YSZ/LSM. It is found that the OCVs of this planar solid oxide cell system rely more on the state of chare than system pressure and the cell polarization resistances mostly come from the fuel elec- trode polarization. The system temperature can be effectively changed by the heat balance of gas, cell component and operation circumstance. While the heat loss in the system has a huge influence on the system temperature and electricity cycling efficiency. It is found that the electricity cycling efficiency can reach above 80% of the commercial mass production standards when copper tank is utilized for heat storage in fuel cell mode and heat utilization in electrolysis cell mode. Keywords Solid Oxide Cell System, Heat Management, Phase Change Metal, Copper 基于相变金属铜的固体氧化物储能电池的 热能管理 * 甘丽珍 ，刘明周 *通讯作者。 文章引用: