贮丝环境工艺参数的优化-烟草科技.PDFVIP

/ Tobacco Science Technology / Manufacturing Technology 20 11 9 (290 ) ,, 　,,　 山东中烟工业有限责任公司济南卷烟厂, 济南市高新区新区科航路2006 号　250 104 :贮丝房;温度;湿度;优 ;含水率 :为了保证在同一贮丝环境下不同价类牌号烟丝在贮存过程中含水率指标的稳定,采用正交试验的 方法, 对贮丝房的温度、湿度进行了分析与优 ,并对优 后的环境条件方案进行了验证。结果表明:① 优 贮丝环境方案为温度26 ℃, 相对湿度58 %;②相对湿度是影响烟丝含水率的关键因素,达到0. 01 的极显著水平;温度对烟丝的含水率影响为弱显著(0. 05 P≤0. 20 );温度、相对湿度之间的交互作用 对烟丝含水率无影响(P 0. 20 );③烟丝牌号的价类越高,受环境温湿度的影响越小, 反之亦然。 :TS452 :B　:1002 -0861 (2011 )09 - 0016 - 04 Optimization of Ambient Air Parameters for Cut Tobacco Storing SUN DONG-LIANG, QIN RI-LUN, HAN YONG, CHENG XIAN-ZHI, and MI QIANG Jinan Cigarette Factory of China Tobacco Shandong Industrial Co. , Ltd. , Jinan 250104, China Keywords:Cut tobacco storing room;Temperature;Humidity;Optimi ation;Moisture content Abstract :For ensuring the stability of moisture content in cut tobacco of different cigarette blends stored in the same ambient conditions, the temperature and relative humidity (RH )in the cut tobacco storing room were analy ed and optimi ed by orthogonal test;and the optimi ed conditions were verified. The results showed that:1 )optimal ambient air parameters were:temperature 26 ℃, RH 58%;2 )RH was the key factor affecting the moisture content in cut tobacco, which reached extremely significant level;temperature affected the moisture content insignificantly (0. 05 P≤0.20 );while the interaction between temperature and RH showed no effect on the moisture content (P 0. 20 );3 )the change of moisture content in cut tobacco negatively correlated with the price categories of cut tobacco, cut tobacco of higher price category was less affected by ambient air parameters. 　　 , [1] 。 。, [2 ] , 、 。,, 。 , 、、 ,。 [3 ] , 、, 1 　 :(1971 - ), , , 1. 1 　材料与设备 。E-mail:sdlsd @sohu. com A ()、B ( :2011 -06 - 20 )