安全工程毕业设计（论文）-两度矿120万吨新井设计 .doc

PAGE 本科生毕业设计 姓 名：　　学 号： 学 院： 应用技术学院 专 业： 安全工程 设计题目： 两度矿120万吨新井设计 专 题： 两度矿防灭火技术研究 指导教师： 职 称：讲 师 2009年 6 月 摘 要 本设计包括三个部分：一般部分，专题部分和翻译部分。 一般部分为两度矿120万吨/a新井通风系统设计。两度矿位于山西省洪洞县，井田南北长约7.3km，东西宽约2到4km，井田面积约34.85km2。本设计只针对两度的3#和4#煤层煤层厚度为3.0m。煤层工业储量为16740万t，矿井可采储量12585.78万t，矿井服务年限为74.2a。 矿井总需风量71.75 m3/s,通风阻力容易时期为1010.5 Pa，困难时期为1394.14Pa。矿井巷道等积孔容易时期为2.94m2,困难时期为2.5m2,通风程度容易。通过计算决定选用Y2-355M-4 型轴流时通风机，其能满足矿井对风量的要求，且通风系统简单，合理，稳定，抗灾能力强。 专题题目部分主要介绍两度煤矿防灭火设计。 翻译题目为：Reduces the gas to gush out the quantity to backlash type high production working surface limit. 关键词：通风设计；防灭火设计；综采回采；安全措施 全套设计，联系153893706 PAGE ABSTRACT This paper consists of three parts: general part, dissertation part and translation. The general part focuses on the design of the ventilation and safety in surburb coal field with the area of 1,200,000t/a.The surburb coal field located in Hongdong county, Shanxi province, with the length of 7.3 km between the south and the north, the wide of two to three km between the west and the east, and the exploitation area of 34.85 km2.Its design aims at three and four coalbed, which thickness is 3.0m. The industrial reserve of the coalbed is 16740 Mt, and the exploitable reserve of the coal field is12585.78Mt with the length of service in 74.2a. The total amount of wind required is 71.75 m3/s, and the ventilation resistence 1010.5Pa at easy period while difficult period of 1394.14Pa. The equivalent orifice is 2.94m2 when easily period while difficult period is 2.5 The title of the dissertation part introduces the fire extinguishing design in Liangdu coal mine. The title of the translation part is Reduces the gas to gush out the quantity to backlash type high production working surface limit. Keywords: ventilation design; Fire extinguishing design; Mechanized mining; safety measures 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc231922003 一 般 部 分 HYPERLINK \l _Toc231922004 1 矿区概述及井田地质特征 PAG