高层建筑抗震设计中两种剪力调整的讨论.pdfVIP

高层建筑抗震设计中两种剪力调整的讨论 黄吉锋，李云贵，邵弘，陈岱林 （中国建筑科学研究院PKPM CAD 工程部，北京，100013） [摘要] 新高规中(3.3.13)条和(8.1.4)条分别提出了对于楼层总剪力最小值和框剪结构中框架总剪 力最小值的限制,从而在结构设计中需要进行剪力调整。这两种调整，前者着重于保证楼层设计剪力 总量的足够，后者着重于使楼层设计剪力的分布更符合楼层的实际弹塑性工作状态。本文探讨了两种 剪力调整的可能的实现方式。对于框剪结构中的框架剪力调整，本文建议了一种新的实现方式。 [关键词] 剪力调整 + + [中图分类号] TU973 .31; TU973 .2 [文献标识码]A On the Two Types of Shearing Force Regulations in the Seismic Design of Tall Buildings HUANG Ji-feng ；LI Yun-gui ；SHAO Hong；CHEN Dai-lin (PKPM CAD Engineering Department ，China Academy of Building Research, Beijing, 100013) [Abstract] The minimums of the total shearing force of a whole storey and the total shearing force of all columns in a storey are given a limitation in the items (3.3.13) and (8.1.4) of the 《Technical Specification for Concrete Structures of Tall Buildings》, respectively. So two types of shearing force regulations are needed to meet these demands. For the two types of shearing force regulations, one emphasizes the adequacy of the total design shearing force of a whole storey and the other emphasizes the uniformity or proportion of the distribution of the storey total shearing force between columns and shear walls of a storey. In this paper, some able schemes to realize the two types of shearing force regulations are discussed and a new method on how to realize the shearing force regulation corresponding to the item (8.1.4) is proposed. [Keywords] shearing force regulations 1.关于框剪结构中框架柱剪力调整的讨论 1.1 楼层剪力的分配机理 研究一个典型楼层，设楼层总剪力为V ，并假设面内位移符合刚性楼板假定，不考虑扭 转，楼层底部固接，楼层顶部为铰接至固接的一个中间态，对于每一根柱或者墙，下式成立：  L3 L   i     V (i 1,2,...,n) （1） i EI GA i