卧式普通车床改双面铣床进给与控制系统设计.docVIP

论文题目 PAGE \* MERGEFORMAT ii 卧式普通车床改双面铣床进给与控制系统设计 摘 要 机床改造又称机床再制造，它实际上是一种基于废旧机床资源循环利用的机床制造新模式,对于循环再利用我国量大面广的老、旧机床设备资源以及更新提升我国制造业机床整体质量和制造加工能力具有重要意义,并将导致若干新兴产业的形成。普通机床的专机化改造是在目前国情下对其进行重新翻新利用的主要手段，本文通过对普通机床进给系统进行改造使其成为一台专用机床，它不仅能大大提高劳动生产效率、降低生产成本、减轻工人劳动强度，同时还给企业带来了可观的经济效益。 本文介绍了继电器-接触器在普通机床改双面铣床进给与控制系统中的应用，分析了双面铣床的工作过程,设计了传动系统和蜗杆-蜗轮减速器，实现了双面铣床的自动循环加工，大大提高了其自动化程度和工作效率。 关键词: 机床改造； 专用铣床； 减速器； 电气控制 The Feed and Control System Design of Transforming the Horizontal Ordinary Lathe into the Double-sided Milling Machine ABSTRACT Machine transformation ,which is also called machine tool remanufacturing , is actually a new manufacturing mode of machine tool，which has great significance for recycling and reusing the worn-out resources and upgrading the whole quality and ability of our country’s manufacturing industry，and will lead to the formation of some new industries . The special modification of ordinary lathes is the primary means to reuse these old machines under the present national conditions. In this article, we make it a dedicated machine to transform the feed system of the ordinary machine. Not only can it enhance the productivity, reduce the processing cost and the worker`s labor intensity, but also bring the considerable economic benefits for the enterprise. This article describes the applications of relay - contactor in the double-sided milling machine and introduces the process of double-sided milling. After that, the transmission system and the worm and worm gear reducer are designed. Finally, the automatic cycle of the machine tool processing was realized and the machine greatly improved the automation level and work efficiency. Keywords: machine transformation; special milling machine; Decelerator; electrical control PAGE \* MERGEFORMAT iii PAGE \* MERGEFORMAT iii 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc356498194 摘 要 PAGEREF _Toc356498194 \h i HYPERLINK \l _Toc356498195 ABSTRACT PAGEREF _Toc356498195 \h ii HYPERLINK \l _Toc356498196 目 录