基于51单片机的1602液晶屏的时钟显示完整程序.docVIP

//基于51单片机的1602液晶屏的时钟显示完整程序 #include reg52.h #define uchar unsigned char #define uint unsigned int sbit en=P2^6; sbit rs=P2^4; sbit rw=P2^5; uchar count,shi,fen,miao; void delay(unsigned int); void init(); void write_com(unsigned char); void write_date(unsigned char); void write_sfm(uchar,uchar); uchar code table[]=2013-2-15; uchar code table1[]=23:59:55; void main() { init(); while(1) { if(count==20) { count=0; miao++; if(miao==60) { miao=0; fen++; if(fen==60) { fen=0; shi++; if(shi==24) { shi=0; } write_sfm(1,shi); } write_sfm(3,fen); } write_sfm(6,miao); } } // while(1); } void delay(unsigned int z) // 延时函数 { unsigned int x,y; for(x=z;x0;x--) for(y=110;y0;y--); } void init() { unsigned char num; en=0; rw=0; write_com(0x38); //设置点阵 write_com(0x0c); //设置光标不闪烁 write_com(0x06); //设置光标地址后移 write_com(0x01); //清屏 write_com(0x80); // 表示从第一行开始显示 for(num=0;num9;num++) { write_date(table[num]); delay(20); } write_com(0x80+0x40); for(num=0;num8;num++) { write_date(table1[num]); delay(20); } TMOD=0x01; TH0=(65536-50000)/256; TL0=(65535-50000)%256; EA=1; ET0=1; TR0=1; } void write_com(unsigned char com) //送指令 { rs=0; rw=0; en=0; P0=com; delay(5); en=1; delay(5); en=0; } void write_date(unsigned char date) //送数据 { rs=1; en=0; rw=0; P0=date; delay(5); en=1; delay(5); en=0; } void time0() interrupt 1 { TH0=(65536-50000)/256; TL0=(65535-50000)%256; count++; } void write_sfm(uchar add,uchar date) //将数据分离 { unsigned char shi,ge; shi=date/10; ge=date%10; write_com(0x80+0x40+add); write_date(0x30+shi); //将数值转化为十六进制 0是30。。。。 write_date(0x30+ge); }