几种柔性机构振动特性的比较分析研究车辆工程专业论文.docxVIP

几种柔性机构振动特性的比较分析研究Comparison 几种柔性机构振动特性的比较分析研究 Comparison Research on Vibration Characteristics of Several Compliant Mechanisms Abstract Whether in engineering or daily life，we expect to achieve the effect of shock absorption and noise reduction．Periodic array of compliant mechanism have a broad application prospect in the field of reducing low frequency noise．In this thesis，the vibration characteristics of compliant mechanism under sinusoidal excitation are analyzed by th．e method of simulation analysis．Modal analysis and harmomc response analysis on the cell of compliant mechanisms are made by using software ANSYS．to get the natural frequency,transfer function and amplitude frequency response of the mechanisms，then compare the vibration characteristics of several compliant mechanisms with this three evaluating indicator． Firstly，this thesis studied the influence of the bracket’S angle on the vibration characteristics of compliant mechanism with single layer bracket．According to the equivalent mass．natural frequency and amplitude of the mechanisms which are obtained by simulation analysis，the physical meaning of the coefficients in the transfer function is explained。At the same time，the accuracy of the simulation results is v．erified． Secondly，the thesis extend several variant mechanism based on compliant mechanism with single layer bracket．Then compare the vibration characteristics between these variant mechanism and compliant mechanisms with single layer bracket，to get the influence on variation of the mechanism．Then,the influence of the pore radius on the vibration characteristics of compliant mechanism with perforated plate iS analyzed． The research shows that the upper bracket angle has greater influence on the natural frequency of compliant mechanism with single layer bracket，the lower bracket angle has a greater influence on the equivalent mass of mechanism．The compliant mechanism with double layer bracket has a better vibration reduction performance than the