电涡流检测系统开发及正向问题研究检测技术与自动化装置专业论文.docxVIP

浙江人学硕士学位论文 浙江人学硕士学位论文 Abstract Abstract Eddy current testing，as one method of the nondestructive testing，is a low cost，fast detection and non-contact technique，and has been being widely used in the aerospace， manufacture and nuclear industries．SuppoSed by the National Nature Science Foundation of China，the paper mainly studied on the design of critical subsystems of a new type of eddy current testing experimental system and researched on the forward problems of eddy current testing．The main research work includes： (1)The development techniques of several critical subsystems of the eddy current testing experimental system were illuminated．A power source whose ripple is limited in l mV was designed．A balance circuit of probes was used to take full advantage of the amplifier．Different methods of program controlled amplifier were compared and experimental results show that the method based on OP and multi-channel chips is the best one and thus it has been adopted in the circuit．The phase sensitive detection Was designed、析th small errors．Auto-zero circuit was used to take full advantage of ADC． And the software of microcontroller was designed to improve the degree of automation of the system． (2)The upper computer software of the eddy current testing experimental system was developed based on the LabView platform．Signal collection，display and storage modules were developed，in which a panel displays four parameters．The median filter was used to eliminate the high frequency interference．Data can be transformed into TXT files for the sake of sharing．The digital phase sensitive detection Was used to simplify the hardware．When SCan speed is low,the precision of the digital phase sensitive detection is 11igh．The protocol of serial communication was designed and has been verified by experiments． (3)The necessity of introducing GMR sensors to eddy current test