xx公司完美版说明书LMR-8240.pdfVIP

High Power Relay Module Description The High Power Relay Module is designed for dry contact power switching of cold cathode, neon, fluorescent, low Feature Summary voltage magnetic transformer, incandescent, outlets, motors, and other non-dimmed loads. Available in 120V and 240V versions, the High Power Relay accepts line • Eight independent relays or four pairs of feeds from up to eight individual breakers. The inputs may interlocked relays also be looped together where the loads do not exceed the power ratings on the module. It has manual override DIP switches allowing the user to control loads without • Total of all outputs not to exceed 120 using the keypads or the connected processor. The loads amps@120 volts may also be controlled from a manual override keypad using standard toggle switches mounted in a remote • Total of all outputs not to exceed 120 amps location. @240 volts The control circuit is protected from short circuits via an external accessible fuse mounted to the circuit board. The replacement fuse should be rated at 250mA/500V AC, and be fast acting. Over-current protection will be provided via the breakers at the breaker panel feeding each input. Each output is rated for 20 amps (2400 watts Ordering InformationOrdering Information at 120V AC and 4800 watts at 240V AC). Each module input is supplied from a 20 amp, 120/240 volt breaker. LMR-8120 120V High Power Relay Module Consecutive outputs cannot exceed 30 amps. Each load must be de-rated. LMR-8240 240V High Power Relay Module The High Power Relay Module operates with eight independent relays or four pairs of interlocked