深水潜标的耐压计算与变形分析.pdf

第29 卷 第5 期 海 洋 通 报 Vol. 29, No. 5 2010 年 10 月 MARINE SCIENCE BULLETIN Oct. 2010 深水潜标的耐压计算与变形分析 王静 1,2 ，栾锡武 1 （1. 中国科学院海洋研究所 海洋地质与环境重点实验室，山东 青岛 266071 ；2. 中国科学院研究生院，北京 100049 ） 摘 要：深海观测潜标是一种深海观测仪器设备，用于深海底部的环境观测和研究。深海潜标设计的难点之一是潜标壳体的结构设 计、耐压计算及材料选择。在初步设计的基础上，利用 abaqus 软件，采用有限元方法，计算出额定外压下壳体的形变，并进行了额 定外压下的失稳计算，计算了壳体在高压环境下的体积和浮力变化。通过计算结果的分析比较，选择了合适的材料，设计出满足强 度要求的壳体。 关键词：深海潜标；仪器舱壳体；有限元；形变；失稳 中图分类号：P715.2 文献标识码：A 文章编号： 1001-6932(2010)05-0481-07 Shell failure and deformation of the submersible buoy under high pressure condition WANG Jing1,2, LUAN Xi-wu1 (1. Key Lab of Marine Geology and Environment, Institute of Oceanology, Chinese Academy of Sciences (IOCAS), Qingdao 266071, China 2. Graduate School of the Chinese Academy of Sciences (GUCAS), Beijing 100049, China) Abstract: Marine submersible buoy is a kind of equipment that is used for observation and research on the sea floor. Design and feasibility analysis of the marine submersible buoy are extremely important. Calculation of the submarine buoy shell under external pressure is the basis of design. Based on the prime designation, Abaqus software with finite element numerical simulation method can calculate the intensity for the selection of submarine buoy shell material, as well as acquire the deformation under external pressure to design a suitable shell. In addition, the lost stability of submersible buoy shell is also being calculated. The change of volume and buoyancy in the deep water circumstances is worked out and should be considered as an important fa