基于labview的温度检测系统设计毕业设计.doc

东华理工大学长江学院毕业设计（论文） 摘要 PAGE PAGE I 摘 要 温度是表征物体冷热程度的物理量，它与人类生活和科学研究密切相关，在生产过程和科学研究中几乎没有不要求温度检测的。在工农业生产和日常生活中，对温度的测量及控制始终占据着重要地位。在现代化工业生产中，需要进行温度测量和监控的场合越来越多。据统计，温度测量占工业生产中各种检测总量的50％左右。测温的方法也多种多样。但是，常规测温法存在许多缺点，这促进了测温技术中新原理、新技术、新方法的发展。虚拟传感器、网络温度传感器、红外测温技术等代表了未来测温技术的发展方向。 本文提出的温度采集检测系统采用LabVIEW图形化编程语言，模块化方法设计开发，增强了软件的可靠性、稳定性。该测控系统通过对温度数据的采集与处理等功能子模块实现了温度的实时显示、分析等功能。波形实时显示模块相当于一个虚拟的数字示波器。该模块采用LabVIEW语言编写，设计出操作简单、可靠性高、可维护性好、具有交互式的图形界面的检测系统。该系统主要功能如下： （1）自动产生随机温度并采集，温度曲线显示； （2）显示温度，并能切换摄氏和华氏模式； （3）可设置温度报警上限，超出限度即LED报警，并记录报警次数； （4）进度指示； （5）能实现中途暂停采集； 关键词：虚拟仪器； LabVIEW； 温度测量； 数据采集 东华理工大学长江学院毕业设计（论文） ABSTRACT Abstract Temperature is a physical objects and degree of human life, and it is closely related with scientific research, production and scientific research of almost no temperature detection requirements. In industrial and agricultural production and daily life, for temperature measurement and control always occupy an important position. In the modern industrial production, the need for temperature measurement and monitoring the situation becomes more and more. According to statistics, temperature measurement of industrial production of all kinds of test about 50% of the total. Temperature measurement method varied also. However, conventional temperature measurement method, there are many shortcomings, which promote the temperature measurement technique, and new principle of new technology, new methods of development. Virtual network sensor, the temperature sensor, infrared temperature-measuring etc represents the future development direction of temperature measurement technology. This paper collected by temperature testing system LabVIEW graphical programming language, modular design method of software development, enhance the reliability and stability. This control system based on temperature data acquisition and processing function modules realize real-time display