《AATCC Evaluation Procedure 10-2006 多纤维贴衬织物的评定》.pdf

AATCC Evaluation Procedure 10 Procedure for the Evaluation of Multifiber Adjacent Fabrics Developed in 2005 by AATCC Commit- 4. Uses and Limitations 7. Specimens tee RA59; reaffirmed 2006. 4.1 The procedure was tested on multi- 7.1 Multifiber fabric, to be used as a fiber test fabrics containing 15 mm wide control (see 15.6); Weight: (3.00 ± 0.1) g. fiber stripes. Multifiber test fabrics con- 7.2 Multifiber fabric under test; 1. Purpose and Scope taining narrower fiber stripes may also be Weight: (3.00 ± 0.1) g; approximately evaluated as long as the aperture on the 100 × 100 mm. 1.1 This procedure is intended to per- spectrophotometer used will accommo- 7.3 Mark the specimens to distinguish mit the qualification of candidate multifi- date the smaller size. between the control specimens and the ber test fabrics, by comparing the stain- 4.2 This procedure was developed us- specimens under test. ing of their components with that of a control multifiber fabric, under controlled ing Staining Scale Rating (SSR) values as conditions. calculated in ISO 105-A04