水泥窑尾预热器钢塔架优化设计研究.PDF

尹 越 陈志华 李 顺 游启枝 王屹峰 ( 300072) ( 300400) : , , , - , , , H , 25% : - OPTIMUM DESIGN RESEARCH ON STEEL FRAME PRE- HEATER TOWER OF CEMENT KILN Yin Yue Chen Zhihua (School of Civil Engineering, ianjin University ianjin 300072) Li Shun You Qizhi Wang Yifeng ( ianjin Cement Industry Design Research Institute ianjin 300400) Abstract : Pre-heater tower is an important structure of the new-style dry process cement production line. he pre-heater tower structure is often designed according to related codes for civil high-rise buildings. Due to special load condition, technical requirements and equipment layout, the tower frame structure hasrestricted structural layout and different structural performance. In this paper, a 5000 PD double series cement kiln was taken as a case study and the structure design of its braced steel frame pre-heater tower was optimized. Based on scheme comparison and the technical requirements, the optimum design scheme was determined to be re-arrangement of columns to reduce the beam span and replacing H-shape steel columns by rectangular hollow section columns or concrete-filled ones. About 25% of the total amount of steel was saved by the optimum design. In addition, the structural characteristics of the steel frame pre-heater tower were studied. Keywords : steel frame pre-heater tower of cement kiln braced steel frame system optimum design structural characteristics , 1 ( 1) , , 100 m 11 原塔架结构设计方案 , ,