潘一矿180万吨新井设计毕业设计论文.doc

最新精品文档，知识共享！ 摘 要 本设计包括三部分：一般部分，专题部分和翻译部分。 一般部分是潘一矿180万吨新井设计。全篇共分为十个部分：矿井概述及井田地质特征、井田境界和储量、矿井工作制度、设计生产能力及服务年限、井田开拓、准备方式－采区巷道布置、采煤方法、井下运输、矿井提升与运输、矿井通风与安全和矿井主要经济技术指标。 潘一矿井位于安徽省淮南市境内。矿井中心东南至风台县城约16km，交通极为方便。矿区范围：西以第Ⅸ勘探线与潘三相接，东以第Ⅳ勘探线与潘二井田毗邻，北部Ⅳ－Ⅴ至Ⅵ勘探线间以潘集背斜轴、Ⅵ至Ⅸ勘探线间与潘二、潘北井田为界，南至13-1煤层-670m底板等高线地面投影线。东西走向长约7.8km，南北倾斜宽2.8km，面积约21.7km2。 13-1煤层为可采煤层，厚度为4.85m，平均倾角为16°。矿井正常涌水量600m3 潘一矿设计年生产能力为180万t/a，服务年限为66a。矿井工作制度为“三八”制。矿井的采煤方法主要为走向长壁综合机械化一次采全高。矿井为单水平采区开拓。水平标高为-600m，采用立井开拓，主立井主要用于提升煤炭，副立井主要用于提升人员、矸石、和材料等。 矿井采用一矿一面的高效作业方式。工作面长度为200m。运输大巷采用胶带运输煤炭，轨道大巷采用蓄电池电机车牵引1.5t固定箱式矿车运输矸石和材料等。 矿井通风方式为抽出通风方式，风井布置方式为两翼对角式。 专题部分介绍了煤矿防尘技术。 翻译部分是一篇关于矿业工程师必备知识矿山地震学，题目为：“Mine Seismology for Rock Engineers – An Outline of Required Competencies ”。 关键词：矿井设计；　 煤矿防尘；　矿山地震学 ABSTRACT This design includes three part: General part, translation part with special subject part. The general part is a mine of Panyi mineral 1,800,000t new well in design. The whole article is divided into ten parts totally: The colliery says all and coalfield quality characteristic, coalfied state with keep deal, colliery work system, the ability of produce in design, and time limit to service, colliery expands and prepare the way － takes the working area tunnel arranges and adopt coal method, the transport under ground, colliery promotes with transport, colliery well ventilated and safety with main economic technique index sign in shaft. The Panyi mine locates in the city of huainan, Anhui province. It is roughly 16 km apart from the eastnorth of fengtai County . the transportation is extremely convenient.. Colliery scope is with line four exploration areas and pansan coal mine，and Interconnected , the line four exploration areas and pa’er coal mine layer for boundary in east,. the north to line four-five to six exploration areas and Anticline axis of panji,six to seven exploration line and pan’er、panbei coal mine,the south to 13-1 coal seams -670m levels contour ground projection line, The alignment in longth