基于ARM的工频通信系统子站设备研制仪器科学与技术专业论文.docxVIP

哈尔滨工业大学工学硕士学位论文 哈尔滨工业大学工学硕士学位论文 - - II - Abstract Two Way Automatic Communication System (TWACS) which appears in recent years is a communication system based on the power distribution network. TWACS owns many distinguishing advantages over traditional Power Line Carrier (PLC), such as that signal can strip over distribution transformer automatically without any trunk equipment, which leads to low cost, simple implantation, strong antijamming capability and so on. After being used for a certain period, some deficiency is found in TWACS, so the system is limited in many situations. Therefore, improvmet on TWACS has a very significant meaning. This thesis introduces the theory of TWACS in brief. The design plan of the system using an ARM kernel CPU is established based on in-depth analysis on the problerms that arise from sub-station of TWACS. The performance of LPC2294 microcontroller which based on an ARM7TDMI-S CPU is also analysed and the circuits of LPC2294 interface are designed, and the TWACS function is accomplished. In order to improve system’s installability, the reception unit and modulation unit of sub-station, which are connected by CAN-Bus, are separated. The circuit of earthnet interface is designed by using the earthnet controller IC RTL8019AS, which accomplishes the sub-station communicate background through internet. The circuits of B-phase electrical current signal synthesis and switching of multi-channel electrical current signal input are also designed in the present work. The system structure of μC/OS-II is analysed in this thesis, and the porting codes of μC/OS-II to LPC2294 processor are programmed. A connection between TWACS and internet by using TCP/IP is established, and the apparatus designed in this work can transform data to internet through UDP. Key words TWACS; CAN-Bus; ARM; μC/OS-II - - I - 目 录 摘要 I HYPERLINK \l _bookmark0 Abstract HYPERLINK \l _bookmark0 II HYPERLINK \l _bookmark1 第 1 章 绪论 HYPERLINK \l _bookmark1 1 HYPERLINK \