熔融还原炼铁技术分析-钢铁钒钛.PDF

30 3 V o.l 30, No. 3 2009 7 IRON STEEL VANADIUM T ITANIUM July 2009 郭培民, 赵 沛,庞建明, 曹朝真 (, 100081) : CORE + , , 250 kg, 1 000 kgFINE + + + CO , , 800 kg, 200 2 kg, FINE ,, H ISMELT, , , ,, , ( ), : ; ; ; CORE ; FINE ; H ISMELT : TF557 : A : 1004- 7638( 2009) 03- 0001- 09 TechnicalAnalysis on SmeltingReduction Ironmaking Process GuoPeim in, ZhaoPei, Pang Jianm ing, Cao Chaozhen (The StateK ey Laboratory forAdvanced Iron and SteelProcesses and Products, Central Iron and SteelResearch Institu- te, Beijing 100081, China) Abstract: M ain smelting reduction ironm aking processeswere analyzed. CORE process, a pre-reduc- tion shaft furnace + gasifier pure oxygen-bow ing process, has been put into industrialproduction. ~ 250 kg coke and ~ 1000 kg fuel are needed for producing 1 ton hotmeta.l FINE process, amult-i step flu- idized bed + hot briquetting + gasifier + CO absorbing pure oxygen-bow ing process, can use ore fines, 2 and its consumption of coke and fuelare ~ 200 kg and 800 kg per ton hotmetal respectively. However, FINE process is very complex, low efficient and still in the stage of industrial expermi ent. H ISMELT tries to reduce and smelt ore fines by one-step process, but it is difficult for the process to realize the an- ticipated targets, and theprocess is still in the stageof technicalresearch. So, present smelting reduction process can not realize low energy consumption andm ild pollution ironmaking process, the key problem is the poor deoxidation properties of ore at low temperature. Improving deoxidation properties of ore can help smelting reduction proce