挡板支架冲压模具的设计与制造.doc

挡板支架冲压模具的设计与制造 本文对小家电产品中的一个常用的挡板支架零件进行多工位传递模（工程模）的设计。该支架的材料为SECC，材料具有耐蚀性；具有很优越的耐蚀性，而且保持了冷轧板的加工性，材料厚度t=3.2mm。该支架的成形工序有冲孔下料和折弯成型。在设计过程中，首先对支架的冲压工艺性进行了分析，确定冲压工艺方案及模具结构类型，并进行了必要的冲压工艺参数计算。模具定位零件、卸料与推件装置的设计，标准模架和导向零件的选用，模具主要工作零件的制造工艺和装配工艺的过程，同时会对模具的工作原理进行分析，包括模具的总装配、试模、润滑及模具使用等内容。 在本次毕业设计利用计算机辅助设计（CAD）绘制模具主要工作零件图和模具的总装配图，运用了数控加工、数控线切割电加工等先进加工技术。 关键词：挡板支架，多工位传递模，冲压工艺，计算机辅助设计 Abstract In this paper, the small home appliance products in a common baffle stents parts of progressive transfer mode (engineering model) design. The stents for SGCC materials, materials are resistant to corrosion; Easy formability and good spot welding sex, material thickness t = 1.2 mm. The forming process of stents are punching the material and bending forming. In the design process, first to the support of the stamping technology are analyzed, and the stamping process program and determine the mould structure types, and through the necessary stamping process parameters are calculated. Mould positioning parts, unloading and push a device design, the standard formwork and guide the selection of parts, mould of the main parts manufacturing process and the process of the assembly process, and work principle of the die for analysis, including the total assembly, try die mould, lubrication and mold use, etc. In the graduation design using a computer aided design (CAD) drawing mould main parts of the die assembly drawings always chart and, using a numerical control processing, numerical control line electric processing advanced processing technology. Keywords: baffle stents, progressive transfer mode, stamping technology, computer aided design 目 录 TOC \o "1-3" \h \z \u HYPERLINK \l "_Toc262804503" 摘 要 PAGEREF _Toc262804503 \h 9 HYPERLINK \l "_Toc262804504" Abstract PAGEREF _Toc262804504 \h 11 1、 HYPERLINK \l "_Toc262804505" 绪 论 PAGEREF _Toc262804505 \h 12 1.1冲压的概念、特点及应用 HYPERLINK \l "_Toc262804506" 1.2课题来源 PAGEREF _Toc262804506 \h 13 1.3选题目的 1.4研究现状与发展趋势 HYPERLINK \l "_Toc262