基于多轨迹矢量加权的矩阵变换器过调制策略.PDF

20 11 年 4 月 电 工 技 术 学 报 Vol.26 No. 4 第 26 卷第 4 期 TRAN SACTION S OF CHINA ELECTROTECHNICAL SOCIETY Apr . 20 11 基于多轨迹矢量加权的矩阵变换器过调制策略 戴钱坤 葛红娟 李光泉 （南京航空航天大学自动化学院 南京 2 100 16） 摘要 针对矩阵变换器的电压传输比较低的问题，提出了一种矩阵变换器的 型过调制策 略，该策略利用圆形轨迹矢量，六边形轨迹矢量和基本矢量加权合成得到综合矢量，不同轨迹 矢量的加权对应不同的调制区。调制区分为线性区和过调制区，过调制区又分为过调制 Ⅰ区和 过调制Ⅱ区，各个区域分别采用了该过调制方法。本文从理论上分析了这种过调制策略的可行 性，并且进行了仿真分析和 机试验。仿真和试验结果均表明本文的矩阵变换器过调制策略可 以有效提高电压传输比，且易于编程实现，输出电压总谐波含量 （THD）得到有效的降低。 关键词：矩阵变换器 加权合成 过调制 电压传输比 中图分类 ：TM30 1 Over-Modulation Strategy of Matrix Converter Based on Multi-Orbit Vector Weighted Dai Qiankun Ge H ongj uan L i Guangquan （Nanj ing University of Aeronautics and Astronautics Nanj ing 2 100 16 China ） Abstract A novel over-modulation method of matrix converter is proposed for the problem of low voltage transfer ratio of matrix converter . Resultant vector is the weighted superposition of circular race vector and hexagon trace vector and base vector, different orbit vector corresponding to different modulation level. A two-level control is linear modulation level and over-modulation level. The over-modulation level is combined with two over-modulation sections, that is over-modulation section I and over-modulation section II, both of which are implemented by this methods. In this paper, this over-modulation strategy is theoretically analyzed and simulated and experimented. The result of simulation and experiment demonstrates that the voltage transfer ratio is effectually enhanced and it is easier to write program of this over-modulation and it has a modest decrease in the total harmonic distortion (THD). Keywords ：Matrix converter, weighted