基于OMAP5912的电力载波视频监控系统设计-控制科学与工程专业论文.docxVIP

ABSTRACTNow ABSTRACT Now the video surveillance is developing to the direction of intelligent， facilitation and hi矾definition,which changes the traditional video surveillance of video processing and transmission modes．CCTV monitoring system for its traditional one．way flow of analog signals，the short distance of the signal transmission in the cable segment and other defects have been gradually replaced by digital monitoring system．Now the popular digital network surveillance system has solved the problems such as the distance and the speed in signal transmission．But because of the cable network has the problem of“last mile’，which make the terminal wiring installation become a defect,this problem particularly serious in the completed projects．The wireless network is a good solution to the network terminal wiring installation，but its uneven distribution signals and the signal dead spots make it only use in some special scope．According to the present situation this article proposes the power line communication video surveillance system，which embedded the dual—core technology and the power line communication technology．This design takes advantage of the widely distributed of the existing power line network，using the power line network for the video data transmission．This design not only provides a novel and convenient way but also will play a huge role in the security monitoring· This paper firstly analysis the situation and advantages of the video surveillance and the power line communication,completed the hardware design of the video surveillance system and detailed analyzed the key modules in the system，including the minimum system circuit，the power line communication module circuit and some inn施ce circuits．Then described the solf}I．ware design in the hardware platform of the OMAP59 1 2，which included the building the development platform，U-BOOT migration,core system cutting and transplantation,DSP／BIOS system application,the driver design of USB camera and some basi