基于WinCE的嵌入式数控系统软件关键技术研究-机械工程专业论文.docxVIP

II II 简化加工程序的编写。 3. 通过实例验证开发的数控系统译码与刀补模块。 论文结尾部分对本数控系统存在的问题进行总结，并提出其需改进与 完善的工作。 关键词：Windows CE 嵌入式数控系统 译码 刀具补偿 III III Development of Numerical Control Software key technologies Based on WinCE and Embedded System ABSTRACT CNC system is the core technology of NC machine. The traditional numerical control system is a closed system, its generality is poor, difficult to transplant and unable to realize network management. The CNC technology base on general PC also also involved in some problems, such as system resources can not be fully utilized, hardware cant well meet the real-time requirements and no ready-made CNC system hardware modules, etc. Address the above problems, this paper did the research on key technologies of based on WindowsCE embedded system, using its high integration, small size, easy to expand and so on, developed a proprietary embedded CNC system, to meet the requirements of real-time and versatility. And added to the system error checking and real-time simulation capabilities, make it easy to operate and visualization. This study is going to cover four key aspects: Make functional requirements analysis of embedded numerical control PAGE PAGE VI system to determine its general framework. To meet requirement of multi-task and strong real-time, the author designed hardware platform and selected upper and lower digital controller for CNC system. In order to achieve the functional designed specifically CNC system software system, and completed it. Design decode module and tool compensation module. Decode module used the compile way to decode NC program, calls error checking module reads NC program for separation and check the NC program morphology and syntax. For complex NC program design appropriate subprogram error checking and decode modules to extend the softwares capabilities. Cutter compensation module use C function tool compensation algorithm encountered in actual