基于WinCE的网络传输系统设计与实现-电路与系统专业论文.docxVIP

Subject ：Design and Implementation of Network Transmission System Based on WinCE Specialty ：Circuit and System Name ：Li Ju-ming （Signature） Instructor：Li Weng-feng （Signature） ABSTRACT In recent years, mining accidents occur frequently in our country, bringing about great economic losses and political influence. Therefore, the State Administration of Coal Mine Safety Supervision Bureau has established a mine emergency rescue command center, which improves the system of emergency rescue command platform. The mine emergency rescue communications system is an important part of the emergency management platform. When the underground accidents occur, the system can provide strong emergency communication services for the emergency rescue command with paralysis of the original underground communications system. This subject comes from the National Science and Technology Support Program “underground visualization wireless communications technology and equipment for disaster relief based on the mesh network (SQ2011SF13B00488)”. The mine emergency rescue communication system adopts a combination way of wired/wireless and fixed/mobile, and this paper mainly completes design of the wired and wireless WiFi network transmission system. This design of the network transmission module includes wired and wireless WiFi module driven design and software design two parts, acting the S3C6410 microprocessor and WinCE embedded operating system as corresponding hardware and software development platform. The wired module and wireless WiFi module respectively use the DM9000 Ethernet controller chip and WM-G-MR-09 module from USI company implement driven design and transplantation. The software part completes a more detailed analysis and transplantation for the Bootloader for S3C6410 microprocessor. After an in-depth study of TCP/IP protocol, the source code of TCP/IP protocol packet is improved and interface is designed, and the transplantation of TCP/IP protocol is successfully achieved to