核主泵模型泵导叶进口边相对位置对泵性能的影响-江苏大学.PDF

26 5 V o.l 26 N o. 5 2008 9 D ra inage and Irr igation M ach inery Sep. 2008 王春林, 彭 娜, 赵佰通, 司艳雷 ( , 2 12013 : 采用雷诺时均 N - S 方程和标准 k - E湍流模型, 应用三维非结构 面体网格建模, 选用旋 转流体机械模型中的多重参考坐标系模型( MR F , 对设计工况下两种不同导叶形式核主泵模型泵 的三维湍流流场进行了数值模拟, 模拟结果较好地揭示了内部流场的特征. 对内部流场的静压分布 特征进行了研究, 发现静压从叶轮进口到球壳呈持续增加的趋势, 且导叶流道的静压分布具有非对 称性的特征, 比较分析了两种模型泵的流线图, 得到了球壳与出口管相交位置处的回流特征. 研究 结果可用来了解核主泵模型泵的内部流场特征, 并为其水力优化设计提供有益参考. : 核主泵模型泵; 导叶; 湍流流场; 数值模拟; SIMPLEC算法 : TH 313 : A : 1005- 6254 ( 2008 05- 00 38- 04 Influence of relative position of diffuser inlet edge on perform ance of nuclear model pump WAN G Chun-lin, PEN G N a, ZHAO B ai-tong, SI Yan-lei ( School of Energy P ow er Eng ineering, Jiangsu U n iversity, Z henjiang, J iangsu 2 120 13, C h ina Abstract: Reyno lds tmi e- averaged N - S equa tions, standard k- E turbulen t m odel, three- dmi ensiona l non- structural tetrahedra l m esh, and m ultiple reference fram e m ode lw ere used to calcu late the three-d-i m ensiona l turbulent flow o f nuclear m odel pum p s w ith wt o d ifferent d iffusers under the design cond ition. The static pressure distribution in interior flow field w as obtained. Continua l increased trend of static pressure from mi peller inlet to spherical shell and unsymm etrica l character in the diffu ser w ere d iscov- ered. Stream lines of the tw o m ode l pum p sw ere compared and analyzed. The resu lts can be u sed to study the interior flow f ie ld characteristics of the nuclear m ode l