PPAP提交培训课件.pptVIP

PPAP (Production Parts Approval Process) Training 生产件批准程序培训 * Production part Approval Process生产件批准程序 Purpose/ 目的 PPAP is using to confirm if supplier well understanding customer design requirement and specification of these components, and well implement in actually process base on run at rate of quotation, and it should be achieved in continuity. PPAP 是用来确定供方是否已经正确理解顾客工程设计记录和规范的 所有要求,并且在执行报价生产节拍的实际生产过程中,具有持续满足 这些要求的能力 * * Production part Approval Process生产件批准程序 GUPT shanghai ask all suppliers who provide components to submit PPAP package according to AIAG PPAP Manual Level 3, unless special request by GUPT; 盖茨优霓塔上海公司要求所有提供原材料的供应商按照AIAG 生产件 批准程序手册3级水平提交PPAP文件包, 如盖茨优霓塔上海公司有特殊要求, 按照特殊要求提交. * * Production part Approval Process生产件批准程序 Requirement of PPAP production process PPAP 生产过程要求 1. PPAP process should be use formal process, facility or fixture, gage, raw material, operators, plant and environment, parameter, etc; PPAP 的过程必须是使用正式的过程、工装、量具、原材料、操作者、生产场地、环境以及生产工艺参数; 2. The number of sample parts to be submitted, the standard sample size will be 300 pieces unless specified by customer. The process should be lasting 1 to 8hours in continual. PPAP 的生产数量至少为连续的300件,且该过程必须是1~8小时的生产, 除非有顾客特殊批准 ; 3. PPAP process should be cover all area if there are over 1 set of cavity, molding, forging process, manufacture line, etc. And measuring and testing samples for that on behave of individual process. 对于采用一个以上型腔、铸模、冲模、工装或加工设备、生产单元、生产线的过程设计,必须安排每一部分进行生产,分别进行产品测量并对代表样品进行试验. * * Production part Approval Process生产件批准程序 PPAP Documentation list PPAP 文件清单 * * Production part Approval Process生产件批准程序 1.Process Flow chart 过程流程图 1. Supplier should create process flow chart by using the symbol and format of which defined in AIAG manual