基于某S7-200和组态王地四级传送带控制系统.docVIP

实用标准 精彩文档 摘要 本文介绍一种以组态王为主要设计平台，并以组态王6.53软件和PLC进行辅助设计的传送带监控系统。本设计根据设计要求， 进行了PLC相关设计，设置了欢迎画面、手动控制画面、自动控制画面、配方画面和退出画面，采用了动画切换、定义变量、动画设计和命令语言编程等方式，另外还设置了手动控制、自动控制和配方功能，实现了对整个传送带的监控系统。 本系统采用四节传送带电路，以PLC为控制核心，以Wincc软件组态的人机界面为监控中心，具备顺序起动和顺序停止功能；当某条传送带发载料超重时，前面的皮带机立即停止，该传送带及其后面传送带延时停止的自动控制功能；当某条传送带发生故障时，该传送带及其前面的传送带立即停止的自动控制等功能。 关键词：监控系统，传送带,组态王，配方 ABSTRACT This paper introduces a kind of automatic Conveyer belt system based on kingview6.53 software for the main platform design. According to the design requirements,the design set the welcome screen, manual control, automatic control picture frames, the formula and out from the picture-picture. According to the design requirements,the design set the animation switching, define a variable, animation design and command language programming method . According to the design requirements, the design set the manual control, automatic control and formula function, realize the automatic Conveyer belt of the monitoring system. According to the design requirements,the design set the realize the automatic Conveyer belt of the monitoring system. Using plc for control center，the man-machine the Wincc software configured for surveillance center, the conveyor possess sequence starting and sequence stopping function; When a conveyor belt in material overweight, In front of the belt conveyor stop immediately, The conveyor belt and following conveyors delay stop of automatic control function; When one of the conveyor belt is at fault, The conveyor belt and forward conveyors to immediately stop of automatic control function. Keywords: monitoring system, Conveyer belt KingView, recipe 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc324706775 第1章 绪论 PAGEREF _Toc324706775 \h 1 HYPERLINK \l _Toc324706776 1.1 传送带的起源与发展 PAGEREF _Toc324706776 \h 1 HYPERLINK \l _Toc324706777 1.2 PLC的发展 PAGEREF _Toc324706777 \h 2 HYPERLINK \l _Toc324706778 1.3 组态软件的发展 PAGEREF _Toc324706778 \h 3 HYPERLINK \l _Toc324706779 1.4 传送带的研究方案及应用前景 PAGEREF _Toc32470