基于虚拟仪器的连铸结晶器振动控制系统设计-控制工程专业论文.docxVIP

内蒙 内蒙古科技大学硕士学位论文 II II Abstract The mould is the important device in continuous casting production process. The vibration quality is directly related to the yield and quality of billet. Therefore, in the continuous casting process, the mould oscillation state monitoring has important significance and practical value. This paper introduced the status of production process development of continuous casting and mould vibration control technology, discussed the mould oscillation mechanism commonly used and its working principle, analyzed the effect of technological parameters of mould oscillation quality and vibration curve, and on this basis to design the control system of the mould vibration based on virtual instrument. Before the industrial computer control technology was widely used, complex, fixed function, poor cooperation, slow-speed technology innovation, high maintenance cost and so on were the traits of traditional mould monitoring system. In recent years, with the rapid development of electronic and information technology, virtual instrument technology has been applied more and more widely because of its flexibility, high integration, expansibility and convenient maintenance. This paper developed a set of the online monitoring system for the continuous casting with signal acquisition, data analyzing and good human-computer interaction interface by PXI system and graphical programming language LabVIEW. The paper introduced overall design and designs of virtual instrument panel, vibration waveform generation module, displacement data collection module, PID control module and Data management. The system uses PXI-6143, the synchronous data acquisition device produced by NI, to realize data collection. The data are processed in PXI embedded device and control signals are output by output equipment PXI-6722. The system can obtain velocity, frequency, amplitude, vibration deviation and other key process parameters through the real-time monitoring of the state of mou