自动泡沫成型机控制系统实施方案研发毕业实施方案.docVIP

个人收集整理 仅供参考学习 个人收集整理 仅供参考学习 PAGE / NUMPAGES 个人收集整理 仅供参考学习 自动泡沫成型机控制系统设计研发 学生姓名：沈张军 指导教师：张志义老师 浙江科技学院机械与汽车工程学院 摘 要 可发性聚苯乙烯（Expandable Polystyrene，EPS），化学名称为聚苯乙烯和苯乙烯系共聚物，它一种是由树脂、物理发泡剂以及其他添加剂以一定比例混合而成地物质.其被大量应用于如建筑领域地屋面隔热、墙体保温、EPS夹芯板、简易活动板房等方面.类似地泡沫塑料制品主要由EPS成型机加工制造而成，EPS颗粒原料在其内部经过预发机发泡，再经干燥、熟化等相关处理后被送入成型模腔内，后续还要通入蒸汽加热并维持模腔内蒸汽压力以使加热工程顺利完成，再经过发泡与保温熔结过程，此时地EPS泡沫已经初步成型，再经过排污冷却定型后即可制成相应地板材制品[1].b5E2RGbCAP 关键字：EPS 应用 成型机 Automatic Foam Molding Machine Control System Design and Developmentp1EanqFDPw Student：Zhangjun Shen Adviser：Dr.Zhiyi Zhang School of Mechanical and Automotive Engineering Zhejiang University of Science and TechnologyDXDiTa9E3d ABSTRACT Polystyrene (Expandable Polystyrene, EPS), its chemical name is Polystyrene and styrene copolymer, it is a kind of material mixed by the resin, the physical foaming agent and other additives to mixed with certain proportion.It is widely applied in roof insulation, wall, such as the construction sector EPS sandwich panel, simple prefabricated houses, etc.Similar foam plastics is mainly composed of EPS molding machine processing and manufacturing, EPS foam raw particles within it through pretest, then after drying, curing and other related treatment are fed into the forming mould cavity, the follow-up to pass into the steam heating and maintain the steam pressure in the cavity to make the heating engineering is completed, after foam insulation with sinter process, EPS foam has preliminarily forming, at this time again after sewage cooling to finalize the design,it can be made into the corresponding plate products[1].RTCrpUDGiT Keywords：EPS Application Molding Machine 目 录 TOC \o 1-3 \h \u HYPERLINK \l _Toc12047 摘要 PAGEREF _Toc12047 I5PCzVD7HxA HYPERLINK \l _Toc3743 Abstract PAGEREF _Toc3743 IIjLBHrnAILg HYPERLINK \l _Toc17626 目录 PAGEREF _Toc17626 IIIxHAQX74J0X HYPERLINK \l _Toc14674 第一章 绪 论1 HYPERLINK \l _Toc5277 1.1 引言1 HYPERLINK \l _Toc7701 1.2 国内外研究现状及发展趋势2 HYPERLINK \l _Toc8021 第二章 自动泡沫成