Article用于光纤多普勒测振的远距离光纤准直系统Long-distanceoptical.PDFVIP

Opto-Electronic Engineering Article 光 电 工 程 2018 年，第45 卷，第2 期 DOI: 10.12086/oee.2018.170621 用于光纤多普勒测振的远距离 光纤准直系统 * 刘 杰，王 伟 ，陈海滨，张雄星，郭子龙 710021 摘要：为了解决光纤多普勒测振仪远距离非接触测量物体振动时，信号偏弱、过零点波形凌乱、难于解调的问题，本 文提出了一种新型光纤准直系统。本系统主要采用在小型C-lens 光纤准直器后端增加整形系统并借助ZEMAX 软件对 高斯光束进行准直并优化，通过对光纤准直系统成品进行耦合测试实验，使用C-lens 准直器与光纤准直系统进行信号 耦合效率的测试对比。实验结果表明：改进后的准直系统能够满足2 m 的工作距离，空间返回光耦合效率最大能达到 6.3% ，极大地提升了多普勒信号的对比度，提高了远距离光纤多普勒测振仪对振动的测量精度。 关键词：光纤准直器；光纤多普勒测量系统；耦合效率；EDFA 中图分类号：TH741 文献标志码：A 引用格式：刘杰，王伟，陈海滨，等. 用于光纤多普勒测振的远距离光纤准直系统[J]. 光电工程，2018 ，45(2): 170621 Long-distance optical fiber collimation system for Doppler vibrometer * Liu Jie, Wang Wei , Chen Haibin, Zhang Xiongxing, Guo Zilong School of Optoelectronics Engineering, Xi’an Technological University, Xi’an, Shaanxi 710021, China Abstract: In order to solve the problem of weak signal, messy waveform at zero-point and difficult demodulation, when the optical Doppler vibrometer in the long-distance non-contact measurement, in this paper, a new type of op- tical fiber collimation system is proposed. The system mainly uses an augmented beam shaping system at the end of a small C-lens optical fiber collimator and the Gaussian beam is collimated and optimized by ZEMAX software. Through the coupling test of finished product of optical fiber collimation system, and compared with the signal cou- pling efficiency of C-lens collimator. The experimental results show that the improved collimation system can meet the working distance of 2 meters, and the coupling efficiency of space return optical up to 6.3%, which greatly en- hances the Doppler signal contrast and improves the long-distance optical fiber Doppler