打叶质量与出片率的关系-烟草科技.PDF

/ Tobacco Science Technology/Manufacturing Technology 2005 1 (210 ) 打叶质量与出片率的关系 1 1 1 2 , , 　, (1.韶关烟叶复烤有限公司, 广东省韶关市南郊4 公里　512027; 2.广东省烟草公司, 广州市林和东路 12 号　510610) :烟叶;打叶质量;含水率;温度; 量;出片率 :为优化12000kg/h 4 打11分卧式打叶机的工艺参数,根据生产线实测结果, 用相关方法分析 了打叶复烤生产线 量、打前烟叶含水率、温度及打叶机组工艺参数对打叶去梗质量及出片率的影响。 结果表明, 随着打叶 量逐渐增大, 碎片率呈近似“U”形变化趋势, 叶中含梗率及梗中含叶率也随之升 高;在 一定范围内, 随着打前烟叶含水率和温度的升高,12.7mm 叶片率提高,3.1 mm 碎片率和梗中 含叶率降低;随着12.7mm 叶片率的提高,虽可减少打叶造碎及梗中含叶率, 提高出片率,但会增大叶 中含梗率。 :TS443　:B 　:1002-0 61(2005)01-000 -04 Relationship between Threshing Quality and Strips Yield LUO HAI-YAN (1), FANG WEN-QING(1), XIE XIN (1), and LI HAN-YUAN (2) 1.Shaoguan Tobacco Redrying Co.Ltd., Shaoguan 512027, Guangdong, China 2.Guangdong Province Tobacco Company, Guangzhou 510610, China Keywords:Tobacco leaf;Threshing quality;Moisture content;Temperature;Throughput;Strips yield Abstract:In order to optimize the technological parameters of the 12000kg/h horizontal threshing line of four-stage- thresher and eleven-classifier, the correlations of threshing quality and strips yield with throughput, moisture content and temperature of tobacco before threshing, and technological parameters of threshing line were analyzed on the basis of accumulated QC data.The results showed that:1)with the increase of throughput, the percentage of fine (3.1 mm )changed as a curve of “U”shape, the values of stem in lamina and lamina in stem increased accord- ingly;2)the share of strips over 12.7mm increased and that of below 3.1 mm and the value of lamina in stem decreased with the increase of moisture content and temperature of tobacco before threshing within a certain range; and 3)with the increase of the share of strips over 12.7mm, the tobacco degradatio