毕业设计（论文）-全喂入背负式水稻联合收割机输送装置设计.doc

背负式水稻联合收割机输送装置的设计 PAGE 1 摘要 该水稻联合收割机可一次性完成收割、脱粒、分离和装袋作业。该机体积小、重量轻，操作灵活，通过性与适应性好，较好地解决了大、中型收割机在丘陵、山区和水田难以收割的难题，在南方双季稻区、泥脚深度不大于２０厘米的稻田中均能正常收割水稻。该机采用全喂入、轴流式滚筒脱粒机构收割，确保脱粒干净、破碎率低，分离性能好。 关键词 ： 收割 脱粒 分离 全套图纸加扣 3012250582 ABSTRACT This rice harvest machine can reap, thresh ,screen,separate and feed one time .It is small,light,and it can be operated flexibly.Also it can be used widly.It can solve the problem that it is difficult to work in mountain area in paddy for the large harvest machine or middle large harvest machine.The machine can work very well in paddy that its depth is not more than twenty inches in south area where the rice can be planted two times in one year.It can be feed wholly.The machine works with axle-flow-roller thresh machine,and it can thresh and separate wholly.Its crack rate is low. Key word ： reap thresh separate TOC \o 1-3 \h \u HYPERLINK \l _Toc3856 1 绪 论 PAGEREF _Toc3856 2 HYPERLINK \l _Toc11079 1.1 课题背景 PAGEREF _Toc11079 2 HYPERLINK \l _Toc22187 1.2 我国联合收割机的现状和发展前景 PAGEREF _Toc22187 2 HYPERLINK \l _Toc13079 1.2.1我国联合收割机的现状 PAGEREF _Toc13079 2 HYPERLINK \l _Toc9721 1.2.2我国联合收割机的发展前景 PAGEREF _Toc9721 3 HYPERLINK \l _Toc2317 1.3 设计的主要内容 PAGEREF _Toc2317 4 HYPERLINK \l _Toc28691 2中间输送装置的设计 PAGEREF _Toc28691 5 HYPERLINK \l _Toc32748 2.1输送槽的结构 PAGEREF _Toc32748 5 HYPERLINK \l _Toc24720 2.2输送槽参数的确定 PAGEREF _Toc24720 6 HYPERLINK \l _Toc12617 3螺旋输送器（搅龙） PAGEREF _Toc12617 8 HYPERLINK \l _Toc15781 3.1 搅龙的构造及应用 PAGEREF _Toc15781 8 HYPERLINK \l _Toc22955 3.2 搅龙的工作原理 PAGEREF _Toc22955 9 HYPERLINK \l _Toc19514 3.3 搅龙输送器的主要参数 PAGEREF _Toc19514 9 HYPERLINK \l _Toc17110 3.3.1 搅龙的内径d PAGEREF _Toc17110 9 HYPERLINK \l _Toc19866 3.3.2 搅龙的外径D PAGEREF _Toc19866 9 HYPERLINK \l _Toc5428 3.3.3 搅龙的螺距S PAGEREF _Toc5428 10 HYPERLINK \l _Toc11175 3.3.5 搅龙叶片的螺旋角 PAGEREF _Toc11175 10 HYPERLINK \l _Toc29110 3.4 搅龙的轴向移动速度 PAGEREF _Toc29110 11 HYPERLINK \l _Toc20416 3.5 谷粒输送搅龙的生产率Q PAGEREF _Toc20416 13 HYPERLINK \l _Toc