UPQC电能质量调节器.pdfVIP

2010 5th International Conference on Industrial and Information Systems, ICIIS 2010, Jul 29 - Aug 01, 2010, India Comparative Evaluation of Performance of Different Control Strategies on UPQC Connected Distribution System S Srinath, Student Member, IEEE, M P Selvan,* and K Vinothkumar, Student Member, IEEE *Assistant Professor, Department of EEE National Institute of Technology Trichirappalli, Tamil Nadu, India selvanmp@nitt.edu, 407108051@nitt.edu Abstract— This paper presents a comparative analysis of steady In recent years, more attention is being paid on the state behaviour of UPQC with three different control techniques, mitigation of voltage sag and swell together with power factor when connected to a distribution system to protect sensitive loads improvement using UPQC. The main cause for sag and swell against power quality problems. The control strategies based is due to the sudden change of line current flowing through the only on hysteresis, SPWM and a combination of both for source impedance. Therefore the analysis of UPQC stresses controlling the firing pulses of shunt and series APFs of UPQC the maintenance of source current (current at PCC) and load are discussed. In common, PI control is used for maintaining DC voltage to be regulated. link voltage. PSCAD/EMTDC is used to model the UPQC connected to a RL load. The simulated model is tested with all the