基于嵌入式系统的图像采集设备信号测试软件的设计与开发-软件工程专业论文.docxVIP

摘要 扫描仪采用的是 CCD 光电成像原理。由于光电成像系统感光的特性，总是在 感光的中心位置光强度大，电信号强，采样数值大，影响了扫描图像的色彩效果。 因此，如何准确的形象化表现不同情况下感光强度成为了重点。 通过对现在扫描仪系统结构的分析，采用了分层体系结构将扫描仪系统分为 三个层次，每个层次之间互相独立。上层与底层之间通过中间层间接连接，利于 对程序进行改造和复用。针对数据传输方式的问题，引入了多线程技术。多线程 技术是当前一种比较流行的用以提高系统运行效率的技术方法。多线程技术可以 更好的实现图像数据信息在各层之间的并行传输，提高图像信息的传输速度，减 少用户等待响应的时间，从而进一步提高扫描仪的工作效率。关于绘制图像的问 题，测试软件将接收到的感光强度数据作为纵坐标，以单位像素作为横坐标最终 实现将感光强度形象化的目的。 关键词：扫描仪 感光强度 多线程技术 分层体系结构 Abstract The scanners use CCD photoelectric imaging principle. Beacause of the photosensitive characteristic of photoelectric imaging system, it is always high light intensity, strong electrical signals and high sampling numerical in the center of photosensitive area. It influences the color effect of scanning image. So, it is important to reflect the light intensity under different circumstances accurately and visually. Based on the analysis of the structure of the existing scanner system, it uses hierarchical architecture to make the scanner system divided into 3 mutually independent layers. The upper and lower layers are connected by the middle layer. It is conducive to the transformation of the process and reuse. It introduces the multi-thread technology according to the data transmission problem. Multi-thread technology is currently a popular method used to improve the efficiency of the system. Multi-thread technology can realize image data in parallel transmission between each layer better. It can improve the transmission speed of image data information, reduce the users waiting time and improve the working efficiency of the scanner. To solve the painting problem, the test software with the light intensity received as the ordinate, per pixel as the abscissa reflects the light intensity accurately and visually. Keywords: Scanners Light intensity Multi thread technology Hierarchical architecture 目录 第一章 绪论 1 1.1 研究背景 1 1.2 课题来源 1 1.3 论文的工作及组织结构 2 HYPERLINK \l _TOC_250001 第二章 GL847 数据采集系统扫描仪分析 5 HYPERLINK \l _TOC_250000 2.1 扫描仪及 CCD 传感器简介 5 2.1.1 扫描仪应用 5 2.1.2 扫描仪的分类 5