HCNR200,HCNR201线性光耦.docVIP

_ HCNR200 and HCNR201 High-Linearity Analog Optocouplers Data Sheet Features ? Low nonlinearity: 0.01% ? K3 (IPD2/IPD1) transfer gain HCNR200: ±15% HCNR201: ±5% ? Low gain temperature coefficient: 65?ppm/°C ? Wide bandwidth – DC to 1 MHz ? Worldwide safety approval –? UL 1577 recognized (5 kV rms/1 min rating)–? CSA approved–? IEC/EN/DIN EN 60747-5-2 approved VIORM = 1414 V peak (option #050) ? Surface mount option available (Option #300) ? 8-Pin DIP package - 0.400” spacing ? Allows flexible circuit design Applications ? Low cost analog isolation ? Telecom: Modem, PBX ? Industrial process control:Transducer isolator Isolator for thermocouples 4?mA to 20 mA loop isolation ? SMPS feedback loop, SMPS feedforward ? Monitor motor supply voltage ? Medical Description The HCNR200/201 high-linearity analog optocoupler consists of a high-performance AlGaAs LED that illuminates two closely matched photodiodes. The input photodiode can be used to monitor, and therefore stabilize, the light output of the LED. As a result, the non-linearity and drift characteristics of the LED can be virtually eliminated. The output photodiode produces a photocurrent that is linearly related to the light output of the LED. The close matching of the photo-diodes and advanced design of the package ensure the high linearity and stable gain characteristics of the optocoupler. The HCNR200/201 can be used to isolate analog signals in a wide variety of applications that require good stability, linearity, bandwidth and low cost. The HCNR200/201 is very flexible and, by appropriate design of the application circuit, is capable of operating in many different modes, including: unipolar/bipolar, ac/dc and inverting/non-inverting. The HCNR200/201 is an excellent solution for many analog isolation problems. Schematic CAUTION: It is advised that normal static precautions be taken in handling and assemblyof this component to prevent damage and/or degradation which may be induced by ESD.