ANSYS FLUENT英文帮助文档中14.5新_功能.pdfVIP

ANSYS FLUENT 英文帮助文档中 14.5 新功能 1、New Features in ANSYS FLUENT 14.5 New features available in ANSYS FLUENT 14.5 are listed below. Where a ropriate references to the relevant section in the Users Guide are provided. 1) Integrated Meshing FLUENT now includes an integrated volume mesher that you can use to create high-quality unstructured grids from within FLUENT in the meshing mode. See FLUENT Meshing Release Notes . 2) Solver-Numerics Simulations using the deforming mesh capability can be solved using second-order discretization in time. The Green-Gauss Node Based gradient method is now available with polyhedral meshes. The pressure-based solver can now be used for periodic flows with the mass flow rate specification method. You can now define source terms and fixed variables using profiles or UDFs. Solution stabilization methods added to help achieve convergence for system coupling cases. ( System Coupling Motion ) 3) Solver-Meshing A matching option is now available to enforce matching of mesh interfaces or periodic zones that are poorly matched ( Using a Non-Conformal Mesh in ANSYS FLUENT ). Additional controls in the Mesh Method Settings dialog box and the Dynamic Mesh Zones dialog box (for deforming motion) to enhance flexibility in a lying spring-based smoothing on various element types (e.g., tetrahedral, triangular) (see Smoothing Methods and Deforming Motion ). You can now include cells in the poor mesh numerics that are not included automatically but nevertheless cause convergence problems or otherwise adversely effect the solution using the solve/set/poor-mesh-numerics/user-defined-on-register text command (see Robustness on Meshes of Poor Quality ). You can now use the CutCell zone remes