环氧树脂胶黏剂制作覆盖膜的性能研究.docVIP

PAGE \* MERGEFORMAT 6 环氧树脂胶黏剂制作覆盖膜的性能研究 【摘要】目的：利用环氧树脂胶黏剂的诸多优点，制作出符合高速传输产品的使用要求的覆盖膜。方法：以环氧树脂为主体黏料，再通过加入一定量的固化剂混合配制而成环氧树脂胶黏剂，配之以特殊的工艺路线以及涂布技术，并对覆盖膜产品的各项性能进行测试。 结果：对制作出的覆盖膜产品进行溢胶量测试、耐焊性测试、剥离强度测试，分析测试结果，所制作的覆盖膜都符合测试要求。结论：由环氧树脂胶黏剂制作的覆盖膜能够达到保护未经过特殊处理的线路免受人为因素和环境的损害的要求。 【关键词】环氧树脂；胶黏剂；覆盖膜。 Study on the Properties of Epoxy Adhesives Used to Make Cover Film [Abstract] Objective: To make use of the advantages of epoxy adhesives to fabricate cover films that meet the requirements for the use of high-speed transmission products. Method: Epoxy resin as the main binder, and then by adding a certain amount of curing agent mixed epoxy resin adhesive formulated with a special process route and coating technology, and cover film products Performance tested. Results: The overlay film products were tested for the amount of overflow, solder resistance, and peel strength, and the test results were analyzed. The overlays produced were in compliance with the test requirements. Conclusion: The cover film made of epoxy adhesive can meet the requirements of protecting the untreated circuit from human factors and environmental damage. [Keywords]: epoxy resin; adhesive; cover film  目 录 TOC \o "1-3" \h \z \u HYPERLINK \l "_Toc510598915" 1 前言 PAGEREF _Toc510598915 \h 1 HYPERLINK \l "_Toc510598916" 1.1 胶黏剂简介 PAGEREF _Toc510598916 \h 1 HYPERLINK \l "_Toc510598917" 1.1.1 胶黏剂定义 PAGEREF _Toc510598917 \h 1 HYPERLINK \l "_Toc510598918" 1.1.2 胶黏剂组成 PAGEREF _Toc510598918 \h 1 HYPERLINK \l "_Toc510598919" 1.1.3 胶黏剂作用 PAGEREF _Toc510598919 \h 5 HYPERLINK \l "_Toc510598920" 1.1.4 胶黏剂类型 PAGEREF _Toc510598920 \h 6 HYPERLINK \l "_Toc510598921" 1.1.5 胶黏剂的发展简史 PAGEREF _Toc510598921 \h 7 HYPERLINK \l "_Toc510598922" 1.1.6 胶黏剂的发展趋势 PAGEREF _Toc510598922 \h 7 HYPERLINK \l "_Toc510598923" 1.2 环氧树脂胶黏剂简介 PAGEREF _Toc510598923 \h 9 HYPERLINK \l "_Toc510598924" 1.2.1 环氧树脂胶黏剂的定义 PAGEREF _Toc510598924 \h 9 HYPERLINK \l "_Toc510598925" 1.2.2 环氧树脂胶黏剂的特点 PAGEREF _Toc510598925 \h 9 HYPERLINK