基于单片机的红外遥控继电控制研究.docxVIP

–PAGE \* MERGEFORMATII– 摘 要 对于无线遥控技术，当前基本上通过以下几种方法实现：红外遥控方式无线电遥控方式，超声波遥控方式。红外技术出现比较早，成本低价格也具有优势。红外遥控具有以下优点：控制内容多，抗干扰能力强，不会发生任何误动作，响应速度快，不会对其他电器产生干扰从而影响用户使用。通过对设计要求的认真分析和研究，拿出了几种可行方案，最终选定了一个最佳方案。发送端由遥控器发射出红外信号；接收端主要有STC89C52单片机，红外接收电路，状态指示电路组成。我们所设计的电路可以遥控3个继电器的开关，并且对红外信号进行解码将码值显示在LCD1602上和用LED灯的暗灭表示出来。 关键词：红外遥控器；继电器；单片机；LCD1602 Abstract In wireless remote control technology, recently we basically apply several ways in the following:Infrared Remote,wireless remote control, and ultrasonic control.Infrared remote technology appears earlier than others.Moreover, it is superior to them in lower cost price. Infrared remote has several advantages.For example, it can control a variety of content;It has the stronger anti-interference ability;It doesn’t make any incorrect procedure.The speed of its response is fast.In addition, It will not influence other electrical equipment to affect the application of the users. Analyzing and researching carefully on design requirements, we selected the best available option in the end from several types of feasible alternatives.The transmitting end is transmitted by the remote control signal; the receiving end is composed of STC89C52 chip, infrared receiving circuit, and the state indicating circuit.The circuit designed by us can be controlled by the switch of the 3 relay.And the infrared signal is decoded and then the code value is displayed on the LCD1602 and the LED. Keywords：Infrared remote controller；Electric relay；SCM；LED160 目录 中英文 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc472082854 摘要 PAGEREF _Toc472082854 \h I HYPERLINK \l _Toc472082855 1引言 PAGEREF _Toc472082855 \h 1 HYPERLINK \l _Toc472082856 1.1选题背景及实际意义 PAGEREF _Toc472082856 \h 1 HYPERLINK \l _Toc472082857 1.2国内外发展概况 PAGEREF _Toc472082857 \h 2 HYPERLINK \l _Toc472082858 1.3 研究内容 PAGEREF _Toc472082858 \h 2 HYPERLINK \l _Toc472082859 2 系统总体设计 PAGEREF _Toc472082859 \h 3 HYPERLINK \l _Toc472082860 2.1 设计要求 PAGEREF _Toc472082860 \h 3 HYPERLINK \l _Toc472082861 2.2 设计思路