jisg34692002聚乙烯覆层钢管.docVIP

?JIS G3469 Polyethylene coated Steel Pipes (JIS G 3469 / JISG3469) 1. Scope This Japanese Industrial Standard specifies the external polyehylene coated steel pipes, hereinafter referred to as the coated steel pipes, mainly used for underground(1) services transporting gas, oil, water, etc.? Note(1) The underground referred to herein includes the bottoms of river, sea, etc.?Remarks ? The standards cited in this HYPERLINK javascript:Open1() Standard are as follows. 2. Classification The coated steel pipes shall be classified into 3 classes, and their symbols shall be as given in Table 1. Table 1 Classification Symbol of class Polyethylene Undercoat Application P1H First layer Adhesive Straight pipe P2S Second layer Gluing agent Straight pipe P1F First layer - Deformed pipe Remarks 1. Subject to the agreement between parties concerned with delivery, gluing agent on the first layer and adhesive on the second layer can be applied respectively. The symbols of calss thereof shall be P1S and P2H respectively.2. The outer layer of polythylene used for P2S shall be for the purpose of packaging. * World Standard Comferens Table KS JIS ASTM DIN BS Grade number Polyethylene Undercoat Application GRADE Grade number GRADE - - - D 3589 First layer Adhesive Straight pipe P1H G-3469 P1H - - - Second layer Gluing agent Straight pipe P2S P2S - - - First layer - Deformed pipe P1F P1F - - - 3.1 Appearance The coating shall stick wall to the steel surface and be free from harmful flaws, unevenness, mingling of foreign subatances, etc. 3.2 Shape and dimension The shape and dimensions shall be as follows? (1) The nominal dimeters shall be expressed by the nominal diameters of the original pipes(2).? (2) The position and shape of coating at both pipe ends, shall be, unless otherwise specified, as shown in Table 2. In case of plain ends, however, it shall be agreed between the parties concerned with delivery.(3) The maximum