ifi第七版美制标准目录.docVIP

IFI第七版紧固件标准目录 第 PAGE 3页共8页 标准代号 标准名称（英文） 标准名称（中文） A部分：螺纹 ANSI/ASME B1.7M 1984(R 2001) NOMENCLATURE，DEFINITIONS，AND LETTER SYMBOLS FOR SCREW THREADS 螺纹的术语、定义和字母代号 ASME B1.1 2003 UNIFIED INCH SCREW THREADS(UN AND UNR THREAD FORM) 统一英制螺纹(UN和UNR螺纹形状) ASME B1.3M 1992(R 2001) SCREW THREAD GAGING SYSTEMS FOR DIMENSIONAL ACCEPTABILITY－INCH SCREW THREADS(UN,UNR,AND UNJ) 尺寸接受的螺纹测量系统 英制和米制螺纹（UN, UNR, 和UNJ） ANSI/ASME B1.2 1983(R 2001) GAGES AND GAGING FOR UNIFIED INCH SCREW THREADS 统一螺纹的量规和测量 ASME/ANSI B1.12 1987(R2003) CLASS 5 INTERFERENCE-FIT THREAD 第5级过盈配合螺纹 ASME B1.15 1995 UNIFIED INCH SCREW THREADS(UNJ THREAD FORM) 统一英制螺纹(UNR螺纹形状) B部分：材料和涂镀 IFI SELECTING FASTENER MATERIAL 紧固件材料选择 IFI BOLT AND NUT COMPATIBILIITY 螺栓和螺母的匹配 IFI CORROSION 腐蚀作用 IFI PLATINGS AND COATINGS 镀层和涂层 IFI-140 2000 CARBON AND ALLOY STEEL WIRE,RODS,AND BARS FOR MECHANICAL FASTENERS 用于机械紧固件的碳素钢和合金钢的线材，圆钢，钢棒 SAE J429 1999 MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS 外螺纹紧固件的机械和材料要求 ASTM A307 2004 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength 碳素钢外螺纹紧固件 ASTM A449 2004b Specification for Hex Cap Screws, Bolts, and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use 经淬火和回火的钢制螺栓和螺柱 ASTM A320/A320M-2005a ALLOY STEEL BOLTING MATERIALS FOR LOW TEMPERATURE SERVICE 低温用合金钢和不锈钢螺栓材料 ASTM A193/A193M-2006 Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications 高温高压用合金钢和不锈钢螺栓材料 ASTM A194/A194M-2006b CARBON AND ALLOY STEEL NUTS FOR BOLTS FOR HIGH PRESSURE OR HIGH TEMPERATURE SERVICE,OR BOTH 高压或高温作业或者高压高温作用用螺栓的碳钢和合金钢螺母 ASTM A354-2004 QUENCHED AND TEMPERED ALLOY STEEL BOLTS,STUDS,AND OTHER EXTERNALLY THREADED FASTENERS 淬火和回火合金钢螺栓、双头螺栓和其它外螺纹紧固件 ASTM F593-2002e2 STAINLESS STEEL BOLTS,HEX CAP SCREWS,AND STUDS 不锈钢螺栓、六角帽螺钉和柱头螺栓 ASTM F468-2006 NONFERROUS BOLTS,HEX CAP SCREWS,AND STUDS FOR GENERAL USE 普通有色金属螺栓、六角帽螺钉和螺柱 ASTM A563-2004a CARBON AND ALLOY STE