多工位级进模毕业设计论文.doc

武汉科技大学本科毕业论文 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT 2 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT 1 摘 要 多工位级进模是在普通模具的基础上发展起来的一种高精度、高效率、长寿命的模具。是技术密集型模具的总要代表，是冲模的发展方向之一。在模具设计前必须对工件进行全面的分析，然后确定工件的冲压成型方案，正确设计模具的结构和模具零件的加工工艺规程，以获得最佳的技术经济效益。 本次设计的零件为板料冲裁弯曲件—衔铁，衔铁采用的材料为电工纯铁，厚度1.8mm保证了足够的强度和硬度。该零件的外形简单，利于合理排样、减小废料。此材料具有良好的塑性及较高的弹性、较高的冲裁性和良好的弯曲性。 关键词：级进模；冲裁；弯曲；排样；设计 Abstract Multi-position progressive which is developed on the basis of the general mold is a mold of high precision, high efficiency, and high durability. Multi-position progressive that is the development of mold is the present of technology-intensive mol. A comprehensive analysis of the workpiece must be made before the mold design. Making a workpiece program and designing the structure correctly after the analysis. The parts of the design is bengding sheet metal parts-the armature iron that is made by electrical iron.The thickness of the iron is 1.8mm which can ensure the strength and the hardness. The parts is of simple shape that conducive to a layout and reducing waste. The blanking of the material is good and it has good plasticity. Key words: progressive die; punching; bending; layout; design 目 录 TOC \o 1-3 \h \u HYPERLINK \l _Toc31827 1 概述 PAGEREF _Toc31827 1 HYPERLINK \l _Toc31007 1.1 毕业设计目的 PAGEREF _Toc31007 2 HYPERLINK \l _Toc3328 1.2 毕业设计任务 PAGEREF _Toc3328 2 HYPERLINK \l _Toc3652 2 制件的结构及工艺性分析 PAGEREF _Toc3652 3 HYPERLINK \l _Toc179 2.1 产品设计要求 PAGEREF _Toc179 3 HYPERLINK \l _Toc32736 2.2 对工件冲裁部分进行工艺性分析 PAGEREF _Toc32736 3 HYPERLINK \l _Toc4955 2.3 对工件弯曲部分进行工艺性分析 PAGEREF _Toc4955 4 HYPERLINK \l _Toc10391 3 工艺方案的确定 PAGEREF _Toc10391 5 HYPERLINK \l _Toc12748 3.1 工艺方案的分析 PAGEREF _Toc12748 5 HYPERLINK \l _Toc21411 3.2 各个方案优缺点的分析 PAGEREF _Toc21411 5 HYPERLINK \l _Toc11561 4 模具的工艺计算 PAGEREF _Toc11561 7 HYPERLINK \l _Toc15656 4.1 毛坯尺寸的计算 PAGEREF _Toc15656 7 HYPERLINK \l _Toc27242 4.1.1 制件的中性层半径 PAGEREF _Toc27242 7 HYPERLINK \l