TraininLimit料位开关中文版.pptVIP

* * * Modular construction, easy change of motor/gear-part with two screws. It is not necessary to disassemble the whole instrument. Easy mounting between thread (process connection) and housing via a Segerring. Double bearing of the motor-gear-part on the top and the bottom. There is no danger, that the gear-shaft will be damaged by the weight of the motor by shock or down-falling tools. Twistable housing. After the installation of the instrument the housing can be adjusted in the right position. This is mainly important by a horizontal installation to make the cable gland showing downside to